Sensors and Actuators A: Phys. Vol. 144 (2008), pp. 18-28 icon

Sensors and Actuators A: Phys. Vol. 144 (2008), pp. 18-28


страницы:   1   2
PUBLICATIONS


REFEREED JOURNAL ARTICLES



  1. P. Wahjudi, J. Oh, S. Salman, J. seabold, D. Rodger, Y.C. Tai, and M. Thompson, “Improvement of metal and tissue adhesion on surface-modified parylene C”, J. of Biomedical materials research, Part A, Vol. 89A, Issue 1, pp. 206-214, 2009.

  2. H.W. Lo and Y.C. Tai, “Parylene-based electrets power generator,” J. Micromech. Microeng. 1B (2008), pp. 1-8.

  3. J. Erickson, A. Tooker, Y.C. Tai and J. Pine, “Caged neuron MEA: a system for long-term investigation of culture neural network connectivity,” J. Neurosceince methods, 175 (2008), 1-16.

  4. Damien C. Rodger, Andy J. Fong, Wen Li, Hossein Ameri, Ashish K. Ahuja, Christian Gutierrez, Igor Lavrov, Hui Zhong, Parvathy R. Menon, Ellis Meng Joel W. Burdick, Roland R. Roy, Reggie Edgerton, James D. Weiland, Mark S. Humayun, and Yu-Chong Tai, “Flexible Parylene-based Multielectrode Array Technology for High-density Neural Stimulation and Recording,” Sensors and Actuators B: Chemical, Vol. 132, Issue 2, 16 June 2008, pp. 449-460.

  5. S. Zheng, M. S. Nandra, C. Y. Shih, W. Li, and Y. C. Tai, "Resonance Induced Impedance Sensing of Human Blood Cells," Sens. Actuators A: Phys. vol.145-146, pp 29-36, 2008.




  1. Ellis Meng, Po-Ying Li, and Yu-Chong Tai. Plasma Removal of Parylene C. 18 No 4 (April 2008) 045004 (13pp).

  2. Ellis Meng, Po-Ying Li, and Yu-Chong Tai, “A biocompatible parylene thermal flow sensing array,” Sensors and Actuators A: Phys. Vol. 144 (2008), pp. 18-28.

  3. M. C. Liu, D. Ho, and Y.C. Tai, “Monolithic fabrication of three-dimensional microfluidic networks for constructing cell culture array with an integrated combinatorial mixer”, Sens. Actuators B: Chem., 129(2), pp 826-833, 2008.




  1. P.J. Chen, D. Rodger, S. Saati, M. Humayun and Y.C. Tai, “Microfabricated implantable parylene-based wireless passive intraocular pressure sensors,” J. Microelectromechanical systems, Vol.17, No.6, Dec. 2008, pp. 1342-1351.




  1. P.J. Chen, D. Rodger, M. Humayun and Y.C. Tai, “Floating-Disk Parylene microvalves for self-pressure-regulating flow controls,” J. Microelectromechanical systems, Vol.17, No.6, 2008, pp. 1352-1361.




  1. Po-Ying Li, Jason Shih, Ronalee Lo, Rajat Agrawal, Saloomeh Saati, Mark S. Humayun, Yu-Chong Tai, and Ellis Meng, “An Electrochemical Intraocular Drug Delivery Device,” Sensors and Actuators A: Physical, Vol. 143, Issue 1, 2 May 2008, pp.41-48.

  2. S. Miserendino, Y.-C. Tai, “Modular microfluidic interconnects using photodefinable silicone microgaskets and MEMS O-rings”, Sensors and Actuators A: Phys. Vol. 143, Issue 1, 2 May 2008, pp. 7-13.




  1. E. Chow, G. Cheng, Y.C. Tai, and D. Ho, “Cellular Inflammation Suppression Via Glucocorticoid-Functionalized Copolymers,” accepted to IEEE NTC Advances in Micro, Nano, and Molecular Systems, 2007.




  1. S. Zheng, J. C.-H. Lin, H. L. Kasdan, and Y. C. Tai, "Fluorescent labeling, sensing, and differentiation of leukocytes from undiluted whole blood samples," Sensors and actuators B: Chemical, vol. 132, pp 558-567, 2008.




  1. S. Zheng, J.-Q. Liu, and Y. C. Tai, "Streamline Based Microfluidic Device for Erythrocytes and Leukocytes Separation in Human Blood," IEEE/ASME J. of Microelectromechanical Systems, vol. 17, pp 1029-1038, 2008.




  1. S. Zheng, M. Liu, and Y. C. Tai, "Micro coulter counters with platinum black electroplated electrodes for human blood cell sensing," Biomedical Microdevices, vol. 10, pp 221-231, 2008.




  1. E. Meng, PY Lee and YC Tai, “A biocompatible parylene thermal flow sensor array,” Sensors & Actuators A, 2007 (in press) (Dec. 2007 on-line).




  1. E. Chow, B. Chu, G. Cheng, Y.C. Tai, E. Pierstorff and D. Ho, “ Co-polymer-mediated fabrication of versatile electro-active and inflammation attenuation substrates for biological interrogation,,” Nano, Vol. 2, No.6, December 2007, pp. 35-359 (Cover story).




  1. S. Zheng, H. Lin, J.-Q. Liu, M. Balic, R. Datar, R. J. Cote, and Y. C. Tai, "Membrane Microfilter Device for Selective Capture, Electrolysis and Genomic Analysis of Human Circulating Tumor Cells," J. of Chromatography A, 1162 (2007), 154-161.




  1. Q. Lin, B. Yang, J. Xie, and YC Tai, “Dynamic simulation of a peristaltic micropump considering coupled fluid flow and structural motion,” J. Micromech. Microeng. 17 (2007) 220-228.




  1. P.J. Chen, D.C. Rodger, R. Agrawal, S. Saati, E. Meng, R. Varma, M.S. Humayun and Y.C. Tai, “Implantable micromechanical parylene-based pressure sensors for unpowered intraocular pressure sensing,” J. Micromech. Microeng. vol. 17, pp. 1931-1938, 2007.




  1. P.J. Chen, D.C. Rodger, E. Meng, M.S. Humayun, and Y.C. Tai, “Surface-Micromachined Parylene Dual Valves for On-Chip Unpowered Microflow Regulation,” J. of Microelectromechanical Systems, 16(2), pp. 223-231, 2007.




  1. T. Bendikov, S. Miserendino, Y.C. Tai, and T. Harmon, “A parylene-protected nitrate selective microsensor on a carbon fiber cross section,” Sensors and Actuators B: Chemical, B123, 2007, 127-134.




  1. A. Aoyagi, D. Yoshikawa, Y. Isono, YC Tai., “Development of a capacitive accelerometer using parylene – study on resonant frequency of parylene suspended structure,” IEEJ Trans. Sensors and Micromachines, Vol. 12, No. 6, pp. 1-7, 2007.




  1. A. Aoyagi, D. Yoshikawa, Y. Isono, YC Tai., “Development of a capacitive accelerometer using parylene – measurement principle using fringe electrical field and characterization,” IEEJ Trans. Sensors and Micromachines, Vol. 12, No. 6, pp. 8-14, 2007.




  1. Yuji Suzuki and Yu-Chong Tai, “Micromachined high-aspect-ratio parylene spring and its application to low frequency accelerometers,” J. of Microelectromechanical Systems, 15(5), pp. 1364-1370, 2006.




  1. D. Yoshikawa, A. Aoyagi, , and Y.C. Tai., “Microfabrication of parylene suspended structure and investigation of its resonant frequency,” Mechatronics for Safety, Security and Dependability in a New Era, 2006, pp. 149-152.




  1. P.J. Chen, C.Y. Shih, and Y.C. Tai, “Design, Fabrication and Characterization of Monolithic Embedded Parylene Microchannels in Silicon Substrate,” Lab on a Chip, 6(6), pp. 803-810, 2006.




  1. P.J. Chen, D.C. Rodger, M.S. Humayun, and Y.C. Tai, “Unpowered Spiral-Tube Parylene Pressure Sensor for Intraocular Pressure Sensing,” Sensors and Actuators A: Physical, 127(2), pp. 276-282, 2006.




  1. H. Lo and Y. C. Tai, “Design, Fabrication and Characterization of Parylene-Packaged Thin-Film Transistors”, ECS Trans. 3, (8) 273 (2006)




  1. C.Y. Shih, Y. Chen, W. Li, J. Xie, Q. He and Y.C. Tai, “An integrated system for on-chip temperature gradient interaction chromatography,” Sensors and Actuators A: Physical, vol. 127, issue 2, 13 March 2006, pp. 270-276.




  1. C.Y. Shih, Y. Chen, and Y.C. Tai, “Parylene-strengthened thermal isolation technology for microfluidic system-on-a-chip applications,” Sensors and Actuators A: Physical, vol. 126, issue 1, 26 Jan 2006, pp. 207-215.




  1. S. Miserendino, J. Yoo, A. Cassell, and Y. C. Tai, “Electrochemical characterization of parylene-embedded carbon nanotubes nanoelectrode arrays,” Nanotechnology, 17 (2006) S23-S28.




  1. C. Pang, Y.C. Tai, J. W. Burdick, and R. A. Andersen, “Electrolysis-based Diaphragm Actuators,” Nanotechnology, 17 (2006) S64-S68.




  1. D.C. Rodger, J.D. Weiland, M.S. Humayun, and Y.-C. Tai, "Scalable high lead-count parylene package for retinal prostheses," Sensors and Actuators B: Chemical, vol. 117, pp. 107-114, 2006.




  1. Xie J, Miao Y, Shih J, He Q, Tai Y.-C, and Lee T.D., “Microfluidic platform for liquid chromatography – tandem mass spectrometry analyses of complex peptide mixture,” Analytical Chemistry, 2005, 77(21), 6947-6953.




  1. A. Tooker, E. Meng, J. Erickson, Y.C. Tai, and J. Pine, “Biocompatible parylene neurocages,” IEEE Engineering in Medicine and Biology, vol. 24, no. 6, pp. 30-33, Nov./Dec. 2005




  1. D.C. Rodger and YC Tai, “Microelectronic packaging for retinal prostheses,” IEEE Engineering in Medicine and Biology, Vol. 24, No. 5, pp. 52-57, Sept.-Oct. 2005.




  1. Q. Lin, Y. Xu, F. Jiang, Y.C. Tai and C.M. Ho, “A Parameterized Three-Dimensional Model for MEMS Thermal Shear-Stress Sensors,” J. of Microelectromechanical Systems, Volume 14, Issue 3, June 2005 Page(s):625 – 633.Summary: This paper presents an accurate and efficient model of MEMS thermal shear-stress sensors featuring a thin-film hotwire on a vacuum-isolated dielectric diaphragm. We consider three-dimensional (3-D) heat transfer in sensors operating in constant-tempe.....




  1. Y. Xu, C.W. Chiu, F. Jiang, Q. Lin and Y.C. Tai, “A MEMS Multi-Sensor Chip for Flow Sensing,” Sensors and Actuators A: Physical, Volume 121, Issue 1, 31 May 2005, Pages 253-261




  1. Xie J, Miao YN, Shih J, He Q, Liu J, Tai YC, Lee TD, “An electrochemical pumping system for on-chip gradient generation” Analytical Chemistry, 2004, 76 (13): 3756-3763.




  1. J. Xie, J. Shih, QA Lin, BZ Yang and YC Tai, “Surface micromachined electrostatically actuated micro peristaltic pump,” Lab-on-a-chip, 4 (5): 495-501 2004




  1. Huang, A.; Lew, J.; Xu, Y.; Tai, YC.; Ho, CM., “Microsensors and Actuators for Macrofluidic Control”, IEEE Journal of Sensors, Volume: 4 , Issue: 4 , pp. 494-502, Aug. 2004




  1. Qiao Lin, Fukang Jiang, Xuan-Qi Wang, Yong Xu, Zhigang Han, Yu-Chong Tai, James Lew and Chih-Ming Ho, “Experiments and simulations of MEMS thermal sensors for wall shear-stress measurements in aerodynamic control applications J. Micromech. Microeng. 14 No 12, December 2004, pp.1640-1649




  1. LJ Yang, TJ Yao and YC Tai, “The marching velocity of the capillary meniscus in a microchannel,” J. of Micromechanics and Microengineering, 14: 220-225, 2004.




  1. HT Hsieh, G Panotopoulos, M Liger, YC Tai and D Psaltis, “A thermal holographic filters,” IEEE Photonics Technology Letters, Vol. 16, No. 1, Jan. 2004.




  1. S. Ho, H. Nassef, N. Pornsin-Sirirak, Y.C. Tai and C.M. Ho, "Unsteady Aerodynamics and Flow Control for Flapping Wing Flyers," Progress in Aerospace Science, 39:635-681, 2003.




  1. Y. Xu, Y.C. Tai, A. Huang and C.M. Ho, “IC-integrated flexible shear-stress sensor skin,” IEEE/ASME J. of Microelectromechanical Systems (J. MEMS), Vol. 12, Issue: 5, pp.740-747, Oct. 2003.




  1. Y. Xu, F. Jiang, S. Newbern, A. Huang, C.M. Ho and Y.C. Tai, “Flexible shear-stress sensor skin and its application to unmanned aerial vehicles,” Sensors and Actuators A: Physical, Volume 105, Issue 3, 15, pp. 321-329, Aug. 2003



  2. L. Yang, W.Z. Lin, T.J. Yao and Y.C. Tai, “Photo-patternable gelatin as protection layers in low-temperature surface micromachining,”, Sensors and Actuators A: Physical, Volume 103, Issues 1-2, 15, pp. 284-290, Jan. 2003.




  1. Tzung Hsiai, Sung Kwon Cho, Joon Mo Yang, Xing Yang, Yu-Chong Tai and Chih-Ming Ho, “Pressure Drops of Water Flow Through Micromachined Particle Filters,” J. of Fluids Engineering, Vol. 124, pp. 1-3, Dec. 2002.




  1. Y.C. Tai, J. Xie and T.D. Lee, Integrated micro/nano fluidics for mass-spectrometry protein analysis. International Journal of Nonlinear Sciences and Numerical Simulation, 2002. 3(3-4): p. 739-741.




  1. T. K. Hsiai, S. K. Cho, J. M. Yang, X. Yang, Y. C. Tai and C. M. Ho, 2002, "Pressure Drops of Water Flow through Micromachined Particle Filters," ASME Journal of Fluids Engineering, Vol. 124, No. 4, pp. 1053-1056, 2002.




  1. Tze-Jung Yao, Xing Yang and Yu-Chong Tai, “BrF3 dry release technology for large freestanding parylene microstructures and electrostatic actuators,” Sensors and Actuators A: Physical, Volumes 97-98, 1, pp.771-775, April, 2002.




  1. Meng E., Wu S., and Tai YC, “Silicon couplers for microfluidic applications,” Fresenius' Journal of Analytical Chemistry, Volume 371, Number 2, September 2001, pp. 270 – 275.


  2. J.M. Yang, C.M. Ho, X. Yang and Y.C. Tai, “Micromachined Particle Filter with Low Power Dissipation,” J. of Fluids Engineering, Vol. 123, pp. 899-908, Dec. 2001.




  1. T. Nick Pornsin-sirirak, Y.C. Tai, H. Nassef and C.M. Ho, “Titanium-alloy MEMS wing technology for a micro aerial vehicle application,Sensors and Actuators A: Physical, 89 (1-2), pp. 95-103, 2001.




  1. Shuyun Wu, Qiao Lin, Yin Yuen and Yu-Chong Tai, “MEMS flow sensors for nano-fluidic applications,” Sensors and Actuators A: Physical, 89 (1-2), pp. 152-158, 2001.




  1. Fukang Jiang, Gwo-Bin Lee, Yu-Chong Tai and Chih-Ming Ho,” A flexible micromachine-based shear-stress sensor array and its application to separation-point detection,” Sensors and Actuators A: Physical, 79 (3), pp. 194-203, 2000.




  1. N. Miyagi, M Kimura, H Shoji, A Saima, CM Ho, S Tung, YC Tai, “Statistical analysis on wall shear stress of turbulent boundary layer in a channel flow using micro-shear stress imager,” Int. J. Heat Fluid Flow, Volume (issue): 21 (5) 2000, pp. 576-581.




  1. Lee, G. B., Chiang, S., Tai, YC., Tsao, T., Liu, C., Huang, P. H. and Ho, C. M., "Robust Vortex Control of a Delta Wing by Distributed MEMS Actuators", Journal of Aircraft, Vol. 37, No. 4, pp. 697, July-August, 2000.




  1. Lee, G.B., Huang, P.H., Ho, C.H., Jiang, F., Grosjean, C., and Tai, Y.C., "Sensing and Control of Aerodynamic Separation by MEMS", The Chinese Journal of Mechanics, Vol. 16, No. 1, pp. 45-52, March 2000.




  1. Huang, P.H., Ho, C.M., Jiang, F. and Tai, YC., "MEMS Transducers for Aerodynamics - A Paradym Shift", AIAA Paper No. 00-0249, Reno, Nevada, January 10-13, 2000.




  1. Licklider L, Wang, XQ, Desai A, Tai, YC and Lee TD, “A micromachined chip-based electrospray source for mass spectrometry, Analytical Chemistry. 2000 Jan 15;72(2):367-75.




  1. MP Maher, J. Pine J. Wright and YC Tai, “The neurochip: a new multielectrode device for stimulating and recording from cultured neuronsJ. Neurosci. Methods, Vol. 87, Issue 1, pp. 45-56, Feb. 1999.




  1. Maher MP, Dvorak-Carbone H, Pine J, Wright JA, Tai YC. , “Microstructures for studies of cultured neural networks.” Med. Biol. Eng. Comput. 1999 Jan;37(1):110-8.




  1. Chang Liu and Yu-Chong Tai, “Sealing of Micromachined Cavities using Chemical Vapor Deposition Methods: Characterization and Optimization,” IEEE/ASME J. of Microelectromechanical Systems (J. MEMS), Vol. 8, No. 2, pp.135-145, June 1999.




  1. X. Yang, C. Groasjean and Y.C. Tai, “Design, fabrication and testing of micromachined silicone rubber membrane valves,” IEEE/ASME J. of Microelectromechanical Systems (J. MEMS),, Vol. 8, No. 4, pp.393-402, Dec. 1999.




  1. B. Liu, J. Huang, A. Zhu, F. Jiang, S. Tung, Y.C. Tai and C.M. Ho, “A Micromachined Flow Shear Stress Sensor Based on Thermal Transfer Principles,” IEEE/ASME J. of Microelectromechanical Systems (J. MEMS), Vol. 8, No. 1, pp.90-99, March 1999.




  1. B. Liu, T. Tsao and Y.C. Tai, “A high-yield drying process for surface-micromachined structures using magnetostatic forces,” Sensors and Materials, Vol. 11, No. 2, pp.071-086, 1999.




  1. J.B. Huang, F.K. Jiang, Y.C. Tai and C.M. Ho, “A Micro-Electro-Mechanical-System Based Thermal Shear-Stress Sensor with Self-Frequency Compensation,” Meas. Sci. Technology, 10, pp.687-696, 1999.




  1. C. Liu, T. Tsao, G.B. Lee. J. Leu, Y. Yi, Y.C. Tai and C.M. Ho, “Out-of-plane magnetic actuators with electroplated permalloy for fluid dynamics control,” Sensors and Actuators A: Physical, 78 (2-3), pp. 190-197, 1999.




  1. X. Yang, J. Yang, Y.C. Tai and C.M. Ho, “Micromachined Particle Membrane Filters, Sensors and Actuators, A: Physical, 73, pp.184-191, 1999.




  1. SW Lee and YC Tai, “A micro cell lysis device” Sensors and Actuators A: Physical, Volume 73, Issues 1-2, 9 March 1999, Pages 74-79.




  1. A Desai, SW Lee and YC Tai, “ A MEMS electrostatic particle transportation system” Sensors and Actuators A: Physical, Volume 73, Issues 1-2, 9 March 1999, Pages 37-44




  1. G.B. Lee, YC Tai, F. Jiang, C. Grosjean, C. Liu and C.M. Ho, “Leading-edge Vortices Control on a Delta Wing by Micromachined Sensors and Actuators,” J. Am. Inst. of Aeronautics and Astronautics, 1999.




  1. Kimura, M., Tung, S., Liu, J., Ho, C.M., Jiang, F. and Tai, YC., "Measurements of Wall Shear Stress of Turbulent Boundary Layer Using Micro Shear Stress Imaging Chip", Fluid Dynamics Research, Vol. 24, pp. 329-342, 1999.




  1. V. Lubecke, W. McGrath, Y.C. Tai and D. Rutledge, “Microfabrication of Linear Translater Tuning Elements in Submillimeter Wave Integrated Circuits,” IEEE/ASME J. of Microelectromechanical Systems (J. MEMS), Vol. 7, No. 4, pp. 404-410, Dec. 1998.




  1. C.M. Ho and Y.C. Tai, “Micro Electro Mechanical systems (MEMS) and Fluid Flows,” Annual Review of Fluid Mechanics, Vol. 30, pp.579-612, 1998.




  1. X. Yang, C. Grosjean, Y.C. Tai and C.M. Ho, “A MEMS Thermopneumatic Silicone Rubber Membrane Valve,” Sensors and Actuators A: Physical, Vol. 64, pp.101-108, 1998.




  1. B. Bokenkamp, A. Desai, X. Yang, Y.C. Tai, E. Marzluff and S. Mayo, “Microfabricated Silicon Mixers for Submillisecond Quench-flow Analysis,” Analytical Chemistry, Vol. 70, No. 2, pp. 232-236, Jan. 1998 (Cover story).




  1. M. Kimura, S. Tung, J. Liu, C.M. Ho, F. Jiang and Y.C. Tai, “Measurements of Wall Shear Stress of Turbulent Boundary Layer Using Micro Shear Stress Imaging Chip”, Journal of Japan Soc. of Mech. Eng., 1998.




  1. R. Miller and Y.C. Tai, "Electromagnetic MEMS Scanning Mirrors," J. of Optical Engineering, Vol. 36, No. 5, May 1997.




  1. S. Tatic-Lucic, J. Wright, Y.C. Tai and J. Pine, “Silicon cultured-neuron prosthetic devices for in vivo and in vitro studies,” Sensors and Actuators, B 43, pp. 105-109, April 1997.




  1. S. Wu, V. Temesvary, Y.C. Tai, and D. K. Miu, "Silicon Micromachined Integrated Suspension Systems for Magnetic Disk Drives", Sensors and Actuators A: Physical, Vol.55, No.2-3, pp. 195-200, July, 1996.




  1. B. Gupta, R. Goodman, F. Jiang, Y.C. Tai, S. Tung, and C.M. Ho, “Analog VLSI system for active drag reduction,” IEEE MICRO -- Chips, Systems, Software, and Applications, pp. 53-59, Oct. 1996.




  1. C.H. Ho and Y.C. Tai, “Review: MEMS and its applications for flow control,” J. of Fluids Engineering, Vol. 118, pp. 437-447, Sept. 1996.




  1. J.B. Huang, S. Tung, C.M. Ho, C. Liu and Y.C. Tai, “Improved Micro Thermal Shear Stress Sensor, “ IEEE Trans. on Instrumentation and Measurement, Vol. 45, No. 2, pp. 570-574, April. 1996.




  1. W. Tang, V. Temesvary, J. Yao, Y.C. Tai and D. Miu, “Silicon Microactuators for Computer Disk Drives,” Jpn. J. Appl. Phys. Vol.35, Part 1, No.1B, pp.350-356, 1996.




  1. J. Shih, C.M. Ho, J. Liu and Y.C. Tai, “Monatomic and Polyatomic Gas Flow through Uniform Microchannels”, ASME MEMS, DSC-Vol. 59, pp 197- 203, 1996.




  1. W. Tang, V. Temesvary, R. Miller, A. Desai, Y.C. Tai and D. Miu, “Silicon-micromachined Electromagnetic Microactuators for Rigid Disk Drives,” IEEE Trans. Magnetics, Vol. 31, No. 6, pp. 2964-2966, 1995.




  1. D. Miu and Y.C. Tai, “Silicon Micromachined SCALED Technology,” IEEE Trans. on Industrial Electronics, Vo. 42, No. 3, pp. 234-239, 1995.




  1. V. Temesvary, S. Wu, W. Hsieh, Y.C. Tai and D. Miu, "Design, Fabrication, and Testing of Silicon Microgimbals for Super-Compact Rigid Disk Drives," IEEE/ASME J. of MicroElectroMechanical Systems (J. MEMS), Vol. 4, No. 1., pp. 18-27, 1995.




  1. J. Shih, C.M. Ho, J. Liu and Y.C. Tai, “Non-linear Pressure Distribution in Uniform Microchannels. ^ ASME AMD-MD. 1995.




  1. D. Miu and Y.C. Tai, "Silicon Microstructures and Microactuators for Compact Computer Disk Drives," IEEE Trans. on Control Systems, Vol. 14, No. 6, pp. 52-57, Dec. 1994.




  1. S. Tatic-Lucic and Y.C. Tai, "Novel Extra-accurate Method for Two-sided Alignment on Silicon Wafers, “ Sensors and actuators A: Physical, Vol. 42, No. 1-3, pp. 573-577, 1994.




  1. V. Temesvary, S. Wu, W. Hsieh, Y.C. Tai and D. Miu, "Design, Fabrication and Testing Of Silicon Microgimbals For Super-Compact Rigid Disk Drives," Dynamic Systems and Control, DCS-Vol. 55-2, pp. 767-774, Vol.2, ASME, 1994.




  1. S. Tatic-Lucic, Y.C. Tai, J. Wright, and J. Pine, "Silicon-Micromachined Cultured Neuron Probes For In Vivo Studies of Neural Networks," Dynamic Systems and Control, DCS-Vol. 55-2, pp. 761-766, Vol. 2, ASME, 1994.




  1. C.M. Ho and Y.C. Tai, "MEMS Science and Technology," Application of Microfabrication to Fluid Mechanics,” FED-Vol. 197, pp. 39-50, ASME, 1994.




  1. K.C. Pong, C.M. Ho, J. Liu, and Y.C. Tai, "Nonlinear Pressure Distribution in Uniform Microchannels," Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 51-56, ASME, 1994.




  1. C. Liu, Y.C. Tai, J. Huang, and C. M. Ho, "Surface-Micromachined Thermal Shear Stress Sensor,” Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 9-16, ASME, 1994.




  1. T. Tsao, C. Liu, Y.C. Tai, and C. M. Ho, "Micromachined Magnetic Actuator for Active Fluid Control," Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 31-38, ASME, 1994.




  1. D. Miu, S. Wu, V. Temesvary, Y.C. Tai, "Silicon Microgimbals for Super-Compact Magnetic Recording Rigid Disk Drives,” Advances in Information Storage Systems, Vol. 5, pp. 139-152, ASME, 1993.




  1. W. McGrath, C. Walker, M. Yap, and Y.C. Tai, "Silicon Micromachined Waveguides for Millimeter-Wave and Submillimeter-Wave Frequencies," IEEE Microwave and Guided Wave Letters, Vol. 3, No. 3, pp. 61-63, March 1993.




  1. M. Mehregany and Y.C. Tai, "Surface Micromachined Mechanisms and Micromotors," J. of Micromechanics and Microengineering (J. MM), Vol. 1, No. 2, pp. 73-85, June 1991.




  1. Y. C. Tai and R. S. Muller, “Frictional Study of IC-processed Micro-motors,” Sensors and actuators, A21-23, pp.180-183, 1990.




  1. Y.C. Tai and R.S. Muller, “Integrated Stylus Force Gauges,” Sensors and Actuators, A21-23, pp.410-413, 1990.




  1. C.H. Mastrangelo, Y.C. Tai, and R. S. Muller, “Thermophysical Properties of Low-residual Stress, Silicon-rich, LPCVD Silicon Nitride Films,” Sensors and Actuators, A21-23, pp.856-860, 1990.




  1. Y.C. Tai and R.S. Muller, “IC-processed Electrostatic Synchronous Motor,” Sensors and Actuators, Vol. 20, No. 1&2, pp. 49-56, Nov. 15, 1989.




  1. L.S. Fan, Y.C. Tai and R.S. Muller, “IC-processed electrostatic micromotors,” Sensors and Actuators, Vol. 20, No. 1&2, pp. 41-48, Nov. 15, 1989.




  1. Y.C. Tai and R.S. Muller, “Lightly-doped Polysilicon Bridge as a Flow Meter,” Sensors and Actuators, 15, pp.63-75, Sep. 1988.




  1. Y.C. Tai, C.H. Mastrangelo, and R.S. Muller, “Thermal Conductivity of Heavily Doped Low-Pressure Chemical Vapor Deposited Polycrystalline silicon films,” J. Appl. Phys. 63 (5), pp. 1442-1447, March 1, 1988.




  1. L.S. Fan, Y.C. Tai, R.S. Muller, “Integrated Movable Micromechanical Structures for Sensors and Actuators,” IEEE Trans. on Electron Devices, Vol. ED-35, No. 6, pp. 724-730, June 1988.


^ REFEREED CONFERENCE PROCEEDINGS


  1. B. Lu, T. Xu, S. Zheng, A. Goldkorn and YC Tai, “Parylene membrane slot filter for the capture, analysis and culture of viable circulating tumor cells,” Proceedings, IEEE MEMS conference (MEMS ’10), Hong Kong, 2010, pp. 935-938.




  1. W. Shi, H. Kasdan, A. Fridge and YC Tai, “Four-part differential leukocyte count using microflow cytometer,” Proceedings, IEEE MEMS conference (MEMS ’10), Hong Kong, 2010, pp. 1019-1022.




  1. F. Yu, J. Lin, PJ Chen and YC Tai, “Parylene stiction,” Proceedings, IEEE MEMS conference (MEMS ’10), Hong Kong, 2010, pp. 408-411.




  1. J. Lin, F. Yu and YC Tai, “Cracking pressure control of parylene checkvalve using slanted tensile tethers,” Proceedings, IEEE MEMS conference (MEMS ’10), Hong Kong, 2010, pp. 1107-1110.




  1. R. Huang and YC Tai, “Flexible parylene-based 3D coiled cable,” IEEE NEMS Conference, 2010.




  1. J. Lin, F. Yu, S. Saati, R. Varma, M. Humayun and YC Tai, “Ex Vivi implantation study of minimally invasive Glaucoma drainage device,” IEEE NEMS Conference, 2010.




  1. F. Yu, C. Lin, PJ Chen and YC Tai, “Stiction of parylene C to silicon surface measured using blister tests,” IEEE NEMS Conference, 2010.




  1. B. Lu, S. Zheng, S. Xie and YC. Tai, “Live capture of circulating tumor cells from human blood by a splitable 3D parylene membrane filtration device”, Proc. of µTAS 2009, Jeju, Korea, 2009, pp. 588-590.




  1. Weiland, J.D.; Humayun, M.S.; Eckhardt, H.; Ufer, S.; Laude, L.; Basinger, B.; Yu-Chong Tai, “A comparison of retinal prosthesis electrode array substrate materials,” Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC, 2009, Page(s): 4140 – 4143.




  1. B. Lu, S. Zheng and YC. Tai, “Parylene Background Fluorescence Study For BioMEMS Applications,” Proceeding of 15th International Conference on Solid-State Sensors, Actuators and Microsystems (




    Download 164.8 Kb.
    leave a comment
    Page1/2
    Date conversion03.10.2011
    Size164.8 Kb.
    TypeДокументы, Educational materials
Add document to your blog or website

страницы:   1   2
Be the first user to rate this..
Your rate:
Place this button on your site:
docs.exdat.com

The database is protected by copyright ©exdat 2000-2017
При копировании материала укажите ссылку
send message
Documents

upload
Documents

Рейтинг@Mail.ru
наверх