Department of Mining and Materials Engineering, McGill University, 3610 University Street icon

Department of Mining and Materials Engineering, McGill University, 3610 University Street


Similar
The College of Engineering, King Saud University, was established in 1382 h (1962 G)...
Center for Vision Science and Technology and Visual Processing Laboratory...
Norwegian University of Science and Technology...
2 Department of Chemistry, Egerton University, P. O. Box 356, njoro, kenya...
Serena Aldrich and Charles Lafon, Department of Geography, Texas A&m university...
2 Department of Mechanical Engineering King Mongkut’s University of Technology Thonburi Bangkok...
1 Department of Civil Engineering, University of Sherbrooke, Sherbrooke, qc, Canada, J1K 2R1...
Christoph Neidhöfer, Schulich School of Music at McGill University...
Diiar department of Hydraulic, Environmental, Street Infrastructures and Survey Engineering...
Teresa Cremin (The Open University), Eve Bearne(University of Cambridge)...
B. Sc. Degree in Electrical Engineering, University of Engineering and Technology Lahore...
University of Washington Utah State University Virginia Polytechnic University...



Загрузка...

In-Ho Jung

Department of Mining and Materials Engineering, McGill University, 3610 University Street,

Montreal, QC, H3A 2B2, Canada.

Tel: +1-514-398-2608. Fax: +1-514-398-4492. Email: in-ho.jung@mcgill.ca .

Employment




09/2007  Present

Assistant Professor. Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Quebec, H3A 2B2, Canada

12/2003  08/2007

Senior Researcher. Research Institute of Industrial Science and Technology (RIST), San32, Hyoja-dong, Nam-gu, Pohang, 790-600, South Korea.

09/2007  12/2003

Post-Doctoral Fellow. Dept. of Materials Science and Engineering, Pohang Univ. Science and Technology (POSTECH), San 31, Hyoja-dong, Nam-gu, Pohang, 790-784, South Korea.













^ Associate Appointments and Centre Memberships




10/2008 – Present

Gerald Hatch Faculty Fellow, McGill University

03/2008 – Present

Adjunct Professor, Génie Chimique, Ecole Polytechnique, Canada

03/2008 – Present

Member of the Centre of Research for Computational Thermochemistry (CRCT), Ecole Polytechnique, Canada

09/2007 – Present

Co-Developer of FactSage thermochemical computing system

03/2005 – 08/2007

Member of the Korea Institute of Industrial Technology Evaluation and Planning













Education




01/1999 – 08/2003

Ph.D. Génie Métallurgique, Ecole Polytechniqe, Montreal, Canada.

Thesis title: Critical Evaluation and Thermodynamic Modeling of Phase Equilibria in Multicomponent Oxide Systems, funded by NSERC CRD grants with 14 Canadian and international companies.

03/1997 – 02/1999

M.Sc. Dept. of Materials Science and Engineering, POSTECH, Pohang, Korea.

Thesis title: Thermodynamic Study on the CaO-MgO-SiO2-Al2O3-FetO-MnO-P2O5 Ladle Slags, funded by POSCO.

03/1993 – 02/1997

B.Sc. Dept. of Materials Science and Engineering, POSTECH, Pohang, Korea.












Awards


  1. Gerald Hatch Faculty Fellow (Oct. 2008).

  2. Best Poster award, CALPHAD 2007 meeting: Youn-Bae Kang, In-Ho Jung, Hae-Geon Lee, “Experiment and Thermodynamic Optimization of the MnO-SiO2-TiO2-Ti2O3 system for application to steel production”.

  3. Team award (Mg project team; 7 researchers and 8 engineers), “Production technology of Mg thin plate”, 2006 Best technology of RIST (Research Institute of Industrial Science and Technology), March, 2007, Pohang, Korea. (Annually awarded to only one excellent project out over 300 projects)

  4. Young Scientist Lecturer award, Asia Steel International Conference 2006, May, Fukuoka, Japan.

  5. In-Ho Jung, JaeKwang Chang, SunAh Kim: 3rd POSCO Ironmaking and Steelmaking Paper Contest (Second best paper award), 1997, POSCO, Pohang, Korea.




^ Research Area

1) Thermodynamic/Kinetic modeling of pyrometallurgical process and metallic system

2) Thermodynamic/Kinetic experiments for pyrometallurgical process (steelmaking, recycling)

3) Phase diagram study for oxide and metallic systems

4) Computer-aided materials design and process optimization







^ Major sponsors for research

1) Pyrometallurgical process: Posco, Corus, RIST, NSERC/FQRNT-Canada

2) Metallic system: GM-Canada, KITECH (Korea), NSERC/FQRNT-Canada










^ Current supervision of students and researchers

4 Ph.D. students, 2 Masters students, 3 Post-Docs, 1 Research associate, 4 Co-supervised Ph.D. students.

Several visiting scholars




^ Patents (15 registered and 7 applied)

  1. S. Ahn, W.-J. Park, I.-H. Jung, D. Choo, J.W. Kim: “Alkali chloride-based molten salts for refining Mg alloy” (registration number WO 2008002111, PCT, 2008, and 760581, Korea, 2007).

  2. D. Choo, W.J. Park, I.-H. Jung, W. Bang, H.J. Sung: Casting apparatus for producing thin plate of nonferrous metal (registration number 835241, Korea, 2008).

  3. D. Choo, S. Ahn, W.J. Park, I.-H. Jung: Apparatus for casting steel sheet (registration number 800292, Korea, 2008)

  4. D. Choo, W.J. Park, I.-H. Jung, I.J. Kim, H.J. Sung: Device for roll casting thin sheets (registration number 062687, Korea, 2008).

  5. W.J. Park, I.-H. Jung, H.J. Sung, T.G. Lee, W. Bang, D. Choo, S. Ahn: Casting rolls having side guide structures comprising side guides projected from both ends of a lower roll and side grooves formed on both ends of an upper roll correspondingly to the side guides (registration number 705701, Korea, 2007).

  6. S. Ahn, W.J. Park, I.-H. Jung, D.G. Lee, D. Choo: Method for controlling hydrogen content in molten magnesium alloys (registration number 0768323, Korea, 2007).

  7. I.-H. Jung, T.G. Lee, W.J. Park, S. Ahn: Method and apparatus for coating titanium thin film by using vapor deposition process (registration number 777430, Korea, 2007).

  8. S. Ahn, W.J. Park, I.-H. Jung, D. Choo, S.D. Hong: Asymmetric slit-shaped nozzles for leading out metal melt (registration number 776043, Korea, 2007).

  9. W.J. Park, I.-H. Jung, S. Ahn, W. Bang: The aluminum alloys having excellent formability and anti-abrasion, and the method for manufacturing the same (registration number 0645114, Korea, 2006).

  10. D. Choo, W.J. Park, I.-H. Jung, S. Ahn: Methods of casting operation in manufacturing Mg strip with strip casting apparatus (registration number 0657591, Korea, 2006).

  11. W.J. Park, I.-H. Jung, H.J. Sung, S.D. Hong, W. Bang, D. Choo, S. Ahn: Side guide of slit type molten iron nozzle (registration number 0657594, Korea, 2006).

  12. D. Choo, W.J. Park, I.-H. Jung, H.J. Sung: Apparatus for casting strip of magnesium alloy with cleaning rolls (registration number 0657595, Korea, 2006).

  13. D. Choo, W.-J. Park, I.-H. Jung, H.J. Sung: “Apparatus for casting strip of magnesium alloy with cleaning rolls”, (registration number 0657595, Korea, 2006).

  14. I.-H. Jung, W.J. Park, S. Ahn: Method for improving the corrosion resistance of magnesium melting crucible (registration number 2006073360, Korea, 2006).

  15. D. Choo, W.J. Park, I.-H. Jung, I.J. Kim: Apparatus for continuous roll-casting magnesium thin plates (registration number 073344, Korea, 2006).

  16. I.-H. Jung, H.J. Sung, W.J. Park, D.K. Lee, S. Ahn, D. Choo: An apparatus for adjusting roll gap (application number 0131991, Korea, 2006).

  17. D. Choo, S. Ahn, W.J. Park, I.-H. Jung: Apparatus for manufacturing a metal strip (application number 0138764, Korea, 2006).

  18. W.J. Park, D. Choo, I.-H. Jung, J.W. Kim: Apparatus for metal matrix composite sheet by sheet, (application number 0132834, Korea, 2006).

  19. D. Choo, H.J. Sung, W.J. Park, I.-H. Jung: Casting roll for Mg slab manufacturing, (application number 0131407, Korea, 2006).

  20. D. Choo, S. Ahn, W.J. Park, I.-H. Jung: System of casting operation in manufacturing Mg strip with horizontal twin roll strip casting apparatus (publication number 0073345, Korea, 2006)

  21. I.-H. Jung, H.J. Sung, W. Bang, S. Ahn: Measurement of roll gap for the twin roll caster (publication number 0073021, Korea, 2006).

  22. D. Choo, W.J. Park, I.-H. Jung, W. Bang: Apparatus for casting strip f magnesium alloy with excellent solidification uniformity, (application number 0129033, Korea, 2005).






^

Invited Talks, Seminars, and Lectures at Industries and Universities


  1. Applications of Thermodynamic Modeling to Steelmaking Process, Corus RD&T center, Ijmuiden, Netherlands, Nov. 19, 2009.

  2. In-Ho Jung, Special workshop for the applications of computational calculations to ceramic and electronic materials, Korea Institute of Ceramic Technology, Seoul, Korea, Nov. 16, 2009.

  3. In-Ho Jung, "Solidification of Mg alloys: experiment and modeling", MagNET workshop on Casting and Solidification of Magnesium, Ottawa, Oct. 15-16, 2009.

  4. Applications of Thermodynamic Modeling to Non-ferrous pyrometallurgy, LS-Nikko, November 4, 2009, Onsan, Korea.

  5. FactSage and Steelmaking, June 9, 2009, POSCO-Gwangyang steelwork, Korea.

  6. Thermodynamic modeling of CaF2 containing slags, June 3, 2009, POSCO, Pohang, Korea.

  7. Thermodynamic modeling of materials and its applications to MSE, May 28, 2009, Ulsan University, Ulsan, Korea

  8. Thermodynamic modeling and its applications to refractory design for steelmaking process, Symposium on Steelmaking Technologies – Refractories in steelmaking, KIMM, May, 29, 2009, Pohang, Korea.

  9. Applications of thermodynamic calculations to Mg alloy design, Magnet workshop, April, 2009, UBC, Canada.

  10. Formation and evolution of non-metallic inclusions in Al killed and Ti bearing molten steel, KU Leuven, Belgium, Dec. 17, 2008.

  11. Invited two-day special lecture on computational thermodynamics, Universidad Michoacana de San Nicolas de Hidalgo (UMSNH), Morelia, Mexico, Dec. 2008.

  12. Inclusion formation/evolution and thermodynamic calculations, POSCO, Pohang, Korea, Oct. 31, 2008.

  13. Thermodynamic modeling of materials and its applications to MSE, Osaka University, Japan, Oct. 9, 2008.

  14. Thermodynamics of coal combustion process, DooSan Heavy metal industry, Dae-Jeon, Korea, June, 2008.

  15. Thermodynamics of ferro-manganese production, May, 2008, POSCO-Gwangyang steelwork, Korea, May, 2008.

  16. FactSage and Steelmaking, GIFT, POSTECH, Pohang, Korea, Feb. 2007.

  17. Thermodynamic modeling of oxides/alloys and its applications, Materials Science and Engineering Graduate Seminar, Korea Univ., October, 2006, Seoul, Korea.

  18. Application of Thermodynamic modeling to Mg-Sn base alloy design, CAMM, POSTECH, April, 2006, Pohang, Korea.

  19. FactSage and Steelmaking, POSCO-Gwangyang steelwork, Korea, January, 2006.

  20. Thermodynamic modeling of Mg alloys and amorphous alloys, CAMM, POSTECH, Pohang, Korea, July, 2005.

  21. Thermodynamic modeling of materials and its applications to MSE, Kangnung Univ., Kangnung, Korea, May, 2005.

  22. Application of thermodynamic modeling and calculations to Si-steel alloy design, POSCO, Pohang, Korea, Feb., 2004.

  23. Thermodynamic modeling for steelmaking process, POSCO, Pohang, Korea, Feb., 2002.

  24. Thermodynamic Calculations for VOD Stainless Steelmaking process, ALZ (stainless steel company in Belgium), Leuven, Belgium, Nov., 2001.







Organizer of Workshops and Meetings

  1. 2009 Magnesium workshop, Ottawa, Canada

  2. 2009 FactSage workshop Korea, June 2-3, 2009, Pohang, Korea. (72 participants)

  3. Magnesium Processing Technology Workshop”, Oct. 3, 2008, McGill, Montreal, Canada. (45 participants)

  4. 2008 FactSage workshop Korea, June 1-2, 2008, Pohang, Korea. (over 60 participants)

  5. 2007 FactSage workshop Korea, August, 2007, Pohang, Korea. (over 50 participants)

  6. POSCO-FactSage workshop, July, 2007, Gwangyang steelwork, Korea.

  7. 2005 FactSage workshop Korea, September, 2005, Pohang, Korea.

  8. Young Calphadian meetings: Prague 2009, Montreal 2002. (over 50 participants)







^ Conference Chairs and Presentations

- Conference session chair:

Conference of Metallurgist-Pyrometallurgy Symposium, Aug. 2009, Sudbury, Canada.

Asia Steel 2009 conference, May 2009, Busan, Korea

International Congress on the Science and Technology of Steelmaking, Oct. 2008, GIFU, Japan.

Asia Steel 2006 conference, May 2006, Fukuoka, Japan.







Journal Publications

  1. In-Ho Jung and Jina Kim, “Thermodynamic modeling of the Mg-Ge-Si, Mg-Ge-Sn, Mg-Pb-Si and Mg-Pb-Sn systems, J. Alloys and Compounds, 2010, vol. 494, pp. 137-147.

  2. Lihong Zhang, In-Ho Jung, S. Yue and E. Essadiqui, An Investigation of Formation of Second Phases in Microalloyed AZ31 Mg Alloys with Ca, Sr and Ce, Journal of Alloys and Compounds, 2010, vol. 492, pp. 173-183.

  3. M. Paliwal and In-Ho Jung, “Thermodynamic modeling of Al-Bi, Al-Sb, Mg-Al-Bi and Mg-Al-Sb systems”, Calphad, 2010, vol. 34, pp. 51-63.

  4. M. Paliwal and In-Ho Jung, “Thermodynamic modeling of Mg-Bi and Mg-Sb systems and short-range-ordering behavior of the liquid solutions”, Calphad, 2009, vol. 33, pp. 744-754.

  5. S. Decterov, Y.-B. Kang and I.-H. Jung, “Thermodynamic database for the Al-Ca-Co-Cr-Fe-Mg-Mn-Ni-Si-O-P-S system and applications in ferrous process metallurgy”, J. Phase Equilibria and Diffusion, 2009, vol. 30, 443-461.

  6. J.H. Park, I.-H. Jung and S.-B. Lee, “Phase diagram study for the CaO-SiO2-Cr2O3-5mass.%MgO-10mass.%MnO system”, Metals and Materials International, 2009, vol. 15, 677-681.

  7. Dmitri Nassyrov and In-Ho Jung, “Thermodynamic modeling of the Mg-Ge-Pb system”, Calphad, 2009, vol. 33, pp. 521-529.

  8. V. Swamy, In-Ho Jung and Sergei Decterov, “Thermodynamic modeling of the Al2O3-B2O3-SiO2 system”, Journal of Non-Crystalline Solids, 2009, vol. 355, pp. 1679-1686.

  9. In-Ho Jung, Gunnar Eriksson, Ping Wu and Arthur Pelton, “Thermodynamic modeling of the Al2O3-Ti2O3-TiO2 system and its applications to the Fe-Al-Ti-O inclusion diagram”, ISIJ Inter. 2009, vol. 49, pp. 1290-1297.

  10. In-Ho Jung, “Reassessment of the Fe-C-O equilibria”, ISIJ Inter., 2009, vol. 49, pp. 1272-1275

  11. J. Calvo, I.-H. Jung, A.M. Elwazri, D. Bai and S. Yue, “Influence of the chemical composition on transformation behavior of low carbon microalloyed steels”, Materials Science and Engineering A, 2009, vol. 520, pp. 90-96.

  12. S. Arnout, M. Guo, I.-H. Jung, B. Blanpain and P. Wollants, “Experimental determination of CaO-CrO-Cr2O3-MgO-SiO2 and thermodynamic modeling of the CrO-Cr2O3-MgO-SiO2 system”, J. Am. Ceram. Soc., 2009, vol. 92, pp. 1831-1839.

  13. Milton Blander, Arthur Pelton and In-Ho Jung, “A condensation model for the formation of chondrules in enstatite chondrites”, Meteoritics & Planetary Science, 2009, 44, pp. 531-544.

  14. C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melançon, A.D. Pelton, C. Robelin, S. Petersen, “FactSage thermochemical software and databases - recent developments”, Calphad 33(2009), pp. 295-311.

  15. M.K. Sun, I.-H. Jung and H.-G. Lee, “Morphology and Chemistry of Oxide Inclusions after Al and Ti Complex Deoxidation”, Metals and Materials Inter., 2008, vol. 14, pp. 791-798.

  16. J.-H. Son, I.-H. Jung, S.-M. Jung, H. Gaye and H.-G. Lee, “Chemical reaction of glazed refractory with Al-deoxidized molten steel” ISIJ Inter., 2008, vol. 48, pp. 1542-1551.

  17. A.N. Grundy, I.-H. Jung, A.D. Pelton and S.A. Decterov, “A model to calculate the viscosity of silicate melts. Part II: The NaO0.5-MgO-CaO-AlO1.5-SiO2 system”, Int. J. Mat. Res. (formerly Z. Metallkd.), 2008, vol. 99, pp. 1195-1209.

  18. A.N. Grundy, H. Liu, I.-H. Jung, S.A. Decterov and A.D. Pelton, “A model to calculate the viscosity of silicate melts. Part I: Viscosity of binary SiO2-MeOx systems (Me = Na, K, Ca, Mg, Al)”, Int. J. Mat. Res. (formerly Z. Metallkd.), 2008, vol. 99, pp. 1185-1194.

  19. W-J Park, In-Ho Jung, W. Bang, I.J. Kim, H.J. Sung, D. Choo, S. Ahn, “Strip casting and coil rolling of magnesium alloy”, Materials Forum Korea, 20, (2007) no. 5, 9-18.

  20. S. Decterov, V. Swamy and In-Ho Jung, “Thermodynamic modeling of the B2O3-SiO2 and B2O3-Al2O3 systems”, Int. J. Mat. Res. (formerly Z. Metallkd.), 98, (2007) 987-994.

  21. S.S. Park, G.T. Bae, D.H. Kang, In-Ho Jung, K.S. Shin and Nack J. Kim, “Microstructure and tensile properties of twin-roll cast Mg-Zn-Mn-Al alloys”, Scripta Materialia, 57 (2007) 793-796

  22. In-Ho Jung, S. Decterov and A. Pelton, “Thermodynamic modeling of the Co-Fe-Si-O system”, Int. J. Mat. Res. (formerly Z. Metallkd.), 98, (2007) 816-825.

  23. In-Ho Jung, Daehoon Kang, Woo-Jin Park, Nack J. Kim and Sangho Ahn, “Application of thermodynamic calculations to Mg alloy design − Mg-Sn based alloy development”, Int. J. Mat. Res. (formerly Z. Metallkd.), 98, (2007) 807-815.

  24. D.H. Kang, S.S. Park, In-Ho Jung and Nack J. Kim, “Effect of Alloying Elements on the Microstructural Evolution of Mg-Sn Based Alloys” Trans. Indian Inst. Met. 60 (2), 2007, pp. 245-250.

  25. In-Ho Jung, Dae-Hoon Kang, Woo-Jin Park, Nack J. Kim and Sangho Ahn, “Thermodynamic modeling of the Mg-Si-Sn system”, Calphad, 2007, vol. 31, pp. 192-200.

  26. Youn-Bae Kang, Chul-Ho Chang, Sang-Chae Park, Han-Soo Kim, In-Ho Jung and Hae-Geon Lee, “Thermodynamics of inclusions engineering in steelmaking and refining”, Iron and Steel Technology, 2006, no. 10, pp. 154-162.

  27. In-Ho Jung: “Thermodynamic modeling of gas solubility in molten slags - (II) Water”, ISIJ Inter., 2006, vol. 46, 1587-1593.

  28. In-Ho Jung: “Thermodynamic modeling of gas solubility in molten slags - (I) Carbon and Nitrogen”, ISIJ Inter., 2006, vol. 46, 1577-1586.

  29. Jin-Hong Park, In-Ho Jung and Hae-Geon Lee: “Dissolution of Al2O3 and MgO in molten slag”, ISIJ inter., 2006, vol. 46, 1626-1634.

  30. Youn-Bae Kang, In-Ho Jung and Hae-Geon Lee: “Critical thermodynamic evaluation and optimization of the MnO-“TiO2”-“Ti2O3” system”, Calphad, 2006, vol. 30(3), 235-247.

  31. Youn-Bae Kang, In-Ho Jung and Hae-Geon Lee: “Critical thermodynamic evaluation and optimization of the MnO-SiO2-“TiO2”-“Ti2O3” system”, Calphad, 2006, vol. 30(3), 226-234.

  32. In-Ho Jung: “Critical evaluation and thermodynamic modeling of the Mn-Cr-O system for the oxidation of SOFC interconnect”, Solid State Ionics, 2006, vol. 177, no.7-8, pp. 765-777.

  33. D. Choo, I.-H. Jung, W. Bang, I.J. Kim, H.J. Sung, W.J. Park, S. Ahn, “Industrial production technology for magnesium sheets”, RIST Yongu Nonmun, 2006, 20(4), 351-358.

  34. J.H. Jun, S.G. Kim, D.H. Kim, J.H. Jun, I.-H. Jung, J.H. Lee: “Effects of alloying elements on electrical conductivity of Fe-Cr alloys for SOFC interconnects”, RIST Yongu Nonmun, (2005), 19(2), 149-158.

  35. Chul-Ho Chang, In-Ho Jung, Sang-Chae Park, Han-Soo Kim and Hae-Geon Lee: “Effect of Mg on the evolution of non-metallic inclusions in the Mn-Si-Ti deoxidized steel during solidification: experiments and thermodynamic calculations” Ironmaking and Steelmaking, vol. 32 (2005), no. 3, pp. 251-257.

  36. Youn-Bae Kang, In-Ho Jung and Hae-Geon Lee: “Experimental and Thermodynamic Modeling of the MnO-SiO2-TiO2-Ti2O3 System”, Materials Science Forum, vol. 475-479 (2005), pp. 293-296.

  37. Pierre Hudon, In-Ho Jung and Don R. Baker: “Experimental investigation and optimization of thermodynamic properties and phase diagrams in the systems CaO-SiO2, MgO-SiO2, CaMgSi2O6-SiO2 and CaMgSi2O6-MgSi2O4 at 1 bar and 1.0 GPa”, J. Petrology, 2005, vol. 46, pp. 1859-1880.

  38. Milton Blander, Arthur D. Pelton, In-Ho Jung and Richard Weber: “Non-equilibrium concepts lead to a unified explanation of the formation of chondrules and chondrites” Meteoritics & Planetary Science, vol. 39 (12), pp. 1897-1910 (2004).

  39. In-Ho Jung, Sergei Decterov and Arthur D. Pelton, “Computer Application of Thermodynamic Databases to Corrosion of Refractories”, Taikabutsu, vol. 56, No. 8, 2004, pp. 382-386. (translated in Japanese from UNITECR 2003 conference article by TARJ)

  40. Dong-Chul Park, In-Ho Jung, Peter. C.H. Rhee and Hae-Geon Lee: “Reoxidation of Al-Ti containing steels by CaO-Al2O3-MgO-SiO2 slag”, ISIJ Inter., vol 44 (2004), No. 10, pp. 1669-1678.

  41. In-Ho Jung, Sergei A. Decterov and Arthur. D. Pelton: “Thermodynamic Evaluation and Optimization of the MgO-Al2O3, CaO-MgO-Al2O3 and MgO-Al2O3-SiO2 Systems” Journal of Phase Equilibria and Diffusion, 2004, vol. 25, No. 4, pp. 329-345.

  42. In-Ho Jung, Sergei A. Degterov and Arthur. D. Pelton: “Thermodynamic Modeling of the CaO-MgO-SiO2 System” J. European Ceramic Society, vol. 25 (2005), No. 4, pp 313-333.

  43. Youn-Bae Kang, In-Ho Jung, Sergei A. Decterov, Arthur D. Pelton and Hae-Geon Lee: “Thermodynamic Evaluation and Optimization of the CaO-MnO-SiO2 and CaO-MnO-Al2O3 systems”, ISIJ Inter. vol. 44 (2004), No. 6, pp. 965-974.

  44. Youn-Bae Kang, In-Ho Jung, Sergei A. Decterov, Arthur D. Pelton and Hae-Geon Lee: “Phase Equilibria and Thermodynamic Properties of the CaO-MnO-Al2O3-SiO2 System by Critical Evaluation, Modeling and Experiment”, ISIJ Inter. vol. 44 (2004), No. 6, pp. 975-983.

  45. In-Ho Jung, Sergei A. Degterov and Arthur. D. Pelton: “Critical thermodynamic evaluation and optimization of the Fe-Mg-O System” J. Physics and Chemistry of Solids, 65 (2004), 1683-1695.

  46. Sang-Chae Park, In-Ho Jung, Kyung-Shik Oh and Hae-Geon Lee: “Effects of Al on the evolution of non-metallic inclusions in the Mn-Si-Ti-Mg deoxidized steel during solidification: experiments and thermodynamic calculations” ISIJ Inter. vol. 44 (2004), No. 6, pp. 1016-1023.

  47. In-Ho Jung, Sergei A. Degterov and Arthur. D. Pelton: “Thermodynamic Modeling of the FeO-Fe2O3-MgO-SiO2 System” Metall. Mater. Trans. 2004, vol. 35B, pp. 877-889.

  48. In-Ho Jung, Sergei A. Degterov and Arthur. D. Pelton: “Thermodynamic Modeling of the Mg-Cr-Al-O System” J. Am. Ceram. Soc., vol. 88 (2005), pp. 1921-1928.

  49. Pierre Hudon, In-Ho Jung and Don R. Baker: “Effect of pressure on liquid-liquid miscibility gaps: A case study of the systems CaO-SiO2 and MgO-SiO2 and CaMgSi2O6-SiO2” Journal of Geophysical Research, Vol. 109 (2004), No. B3, B03207.

  50. In-Ho Jung, Sergei A. Degterov, Arthur. D. Pelton, Hyun-Min Kim and Youn-Bae Kang: “Thermodynamic Evaluation and Modeling of the Fe-Co-O System”, Acta Materialia, 2004, vol. 52 (2), pp. 507-519.

  51. In-Ho Jung, Youn-Bae Kang, Sergei A. Degterov and Arthur D. Pelton: “Thermodynamic Evaluation and Optimization of the MnO-Al2O3 and MnO-Al2O3-SiO2 Systems and Applications to Inclusion Engineering”, Metall. Mater. Trans. B, 2004, vol. 35B, pp. 259-268.

  52. In-Ho Jung, Sergei Decterov and Arthur. D. Pelton: “Computer Applications of Thermodynamic Databases to Inclusion Engineering”, ISIJ International, vol. 44 (2004), No. 3, pp. 527-536.

  53. In-Ho Jung, Sergei A. Decterov and Arthur D. Pelton: “A Thermodynamic Model for Deoxidation Equilibria in Steel”, Metall. Mater. Trans. B, 2004, vol. 35B, pp. 493-507. (TMS Landmark Paper)

  54. Sergei A. Decterov, In-Ho Jung and Arthur D. Pelton: “Thermodynamic Modeling of the FeO-Fe2O3-MgO-SiO2 System”, J. Am. Ceram. Soc., 85[12], 2903-10 (2002).

  55. Pierre Hudon, In-Ho Jung and Don R. Baker: “Melting of -quartz up to 2.0 GPa and thermodynamic optimization of the silica liquidus up to 6.0 Gpa”, Physics of the Earth and Planetary Interiors, 2002, vol. 130 (3-4), pp. 159-174.

  56. In-Ho Jung, Jeong-Do Seo and Seon-Hyo Kim, “Thermodynamic behavior of manganese and phosphorus between CaO-MgOsat-Al2O3-SiO2-FetO-MnO-P2O5 ladle slag and liquid iron”, Steel Research, 2000, vol. 71(No.9), pp. 333-339.




Journal Publications accepted / in press

  1. Daehoon Kang and In-Ho Jung, “Critical evaluation and thermodynamic optimization of the Ag-Cu-Zr system”, Intermetallics, 2010, in press.

  2. In-Ho Jung and Youn-Bae Kang, “Comment on "Thermodynamic modelling of an Al2O3-MnO system using the ionic model" by A. B. Farina and F. B. Neto”, Calphad, 2010, in press.




Conference

2007 – present : 25 proceeding articles. (Total 38 papers)

2007 – present : 10 conference presentation without proceeding articles. (Total 42 presentations)











Download 82.66 Kb.
leave a comment
Date conversion30.09.2011
Size82.66 Kb.
TypeДокументы, Educational materials
Add document to your blog or website

Be the first user to rate this..
Your rate:
Place this button on your site:
docs.exdat.com

The database is protected by copyright ©exdat 2000-2017
При копировании материала укажите ссылку
send message
Documents

upload
Documents

Рейтинг@Mail.ru
наверх