Helwan University icon

Helwan University


Similar
Helwan University...
Teresa Cremin (The Open University), Eve Bearne(University of Cambridge)...
University of Washington Utah State University Virginia Polytechnic University...
B. A.(economics) 1971 Ohio University, J. D. 1979 University of Miami Ph. D...
Department of Mining and Materials Engineering, McGill University, 3610 University Street...
University of Ioannina, Greece & visiting London Metropolitan University, uk...
Marjo c a korpel   (Utrecht University, The Netherlands & University of Pretoria)...
Business Informatics a program very popular in Europe since the early ‘90's is now offered at...
Particular thanks are due to Miriam McArdle, Queen’s University Belfast, and Toni Ibarz...
Indiana University Purdue University at Indianapolis (=iupui)...
Eastern mediterranean university university Curriculum Committee...
2 Department of Chemistry, Egerton University, P. O. Box 356, njoro, kenya...



страницы: 1   2   3   4   5   6   7   8   9
return to the beginning








SYLLABUS :

for

 First Stage

(Electronics Engineering)

M.Sc. / M.ENG

ُ (FULL – TIME / PART - TIME)

^ INTEGRATED ELECTRONIC CIRCUITS (BC-172601)

Contents:

Noise analysis, advanced op-amp design techniques, analog VLSI building blocks, multipliers, oscillators, mixers, phase-locked loops, A/D and D/A converters, passive filter design, frequency scaling, active filter design. Background: ELEC 221 and ELEC 304 Exclusion: ELEC 504

Review of MOSFET characteristics, device modeling for circuit simulation (SPICE models), the BSIM MOSFET models, other semiconductor models, circuit model parameter characterization, design guard-band and statistical modeling. System definition, design and analysis of integrated circuit systems: mixed-signal systems, low power systems, embedded systems, etc. System trade-offs; introduction to system-on-chip (SOC) concepts and methodology; case studies.

References:


  1.  "Linear Integrated Circuits", Joseph J. Carr, Newnes 1996.

  2. Digital Integrated Circuits", Jan M. Rabaey, Prentice Hall 2002.

--------------------------------------------------------------


^ DESIGN OF VLSI CIRCUITS (BC-172602)

Contents:

 Introduction to VLSI design – motivation for IC design, IC design process, design abstraction levels, CAD tools, elements of system specification and design.

 Combinational logic design, logic minimization, synchronous sequential logic design. Finite state machines, Mealy and Moore models, Designing with programmable logic devices ROM, PLA, PAL, PLD.

 A synchronous sequential logic- analysis procedure, state minimization, state assignment, static and dynamic hazards.

 

Introduction to VHDL – basic concepts in VHDL, language features, types of VHDL description – structural, data flow and behavioral descriptions of hardware, combinational and sequential design examples using VHDL.

 Features and internal structure of CPLDs, FPGAs, designing with CPLDs and FPGAs. Introduction to IC floor planning and testing, design for testability, combinational logic testing, sequential logic testing, ATPG, boundary scan, built in self test.

Design examples and case studies


References:

1.     VHDL: Analysis and Modeling of digital Systems – Zainalabedin Navabi, Mc Graw Hill, 1993.

2.     VHDL Prniter – Bhaskar, PHI, 3rd Edition, 1999.

3.     Digital Principles and Design- Donald D. Givone, Tata McGraw Hill, 2002.

4.     Digital Design – M.M. Mano, Third Edition, Pearson Education 2001.

5.     Digital Design – Principles and Practice – John.F.Wekerly, third edition, Pearson Education 2001.

6.     Modern VLSI design – Wayne wolf, Pearson Education, 1997.

7.     Specification and Design of Embedded Systems – daniel D. Gajski, Frank Vahid, Sanjiv Narayan, Jie Gong, Prentice Hall 1994.

--------------------------------------------------------------


^ DIGITAL SYSTEM DESIGN (BC-172603)

Contents:

The course focuses on the use of hardware description languages such as VHDL/Verilog in the design of digital systems for platform-independent design. Target implementation platform include both ASIC (standard cell design) and FPGAs. High-level design tools will be introduced for specification, simulation, and synthesis. The course will introduce design methodologies such as top-down synthesis approach, Hierarchical and abstraction concepts, HDL for synthesis, design for testability. Specialized application and specific VLSI/FPGA architectures will be discussed.

References:

1- "Digital System Design with VHDL", Mark zwolinski, prentice Hall 2003.

2- "Digital system : principles and design", Raj Kamal, prentice Hall 2009.


--------------------------------------------------------------


^ TESTING AND FAULT DIAGNOSIS FOR ELECTRONIC CIRCUITS (BC-172604)

Contents:

VLSI Test Concepts. Broad introduction to basic concepts, techniques, and tools of modern VLSI testing. Fundamentals of defect modeling, fault simulation, design for testability, built-in self test techniques, and failure analysis. Test economics, physical defects and fault modeling, automated test pattern generation, fault simulation, design for test, build-in self test, memory test, PLD test, mixed signal test, Iddq test, boundary scan and related standards, test synthesis, diagnosis and failure analysis, automated test equipment, embedded core test.

References:

1- "VLSI Digital Signal Processing Systems: Design and Implementation", Keshab K. Parhi, wiley Interscience 1999.

2-"Low Power Digital VLSI Design: Circuits and system", A. Bellaouar, et al, Kluwer Academic Pub., 1995


--------------------------------------------------------------


^ RESEARCH TOPICS AND TECHNICAL REPORTS

(BC-172605)

Contents:

 Selected topics from recent developments and applications in various engineering disciplines. Designed to help professional engineering community keep abreast of current developments.


--------------------------------------------------------------


ELECTIVE -1 ------ ^ MICRO TRANCEDUCERS (EC-172601)

Contents:

Introduction to MEMS. Topics will include: electronic microsensors, thermocouples, thermopiles, diodes, capacitors, and transistors, transducer principles, virtual work, electro-mechanical analysis, testing, dynamical macro-models, material properties, fabrication, and micro-machining, design principles, and case study. Prerequisites: Graduate standing or permission of the instructor.

Electronic and Si-based bio sensors for bio-molecule detection, cell manipulation, and neural tissue interfacing have attracted much attention during recent years. CMOS-based solutions promise to be small, cheap, and smart, moreover they open the way to high parallelism and signal (pre-) processing close to the transducer site where these signals are generated. A number of in-vitro applications - in life sciences, biotechnology, medical diagnosis, ... - utilizing biosensor arrays are expected to exploit these properties, and a couple of approaches already have been successfully commercialized or are on the way.

References:

1-"Sensors and Transducers", Ian R. Sinclair, Newnes, 2001.

2-"Transducer in Mechanical and electronic design", Harry L. Trientley, Marcel Dekker, 1986.

3-"Signal Transduction and the coordination of Blymphocyte development and Function I : Transduction of Bcr Signals from the cell Membrane to the Nucleus", L. B. Justement , et al, Springer Verlag, 1999.


--------------------------------------------------------------


ELECTIVE -2 ------^ COMPUTER AIDED DESIGN (EC-172602)


Contents:

This course aims to present the fundamental concepts and algorithms applied in design automation (CAD) of VLSI circuits. The scope will include various areas in physical design of digital systems, including circuit partitioning, FPGA technology mapping, floorplanning, placement, routing, compaction and interconnect optimization.

References:

1- "Computer aided Fixture Design", Yiming Rong, et al, Mzrcel Dekker Inc. 1999.

2- " Computer aided Logical Design & Emphasis on VLSI, Fredrick J. Hill, et al, John Wiley & Sons Inc. 1993.


--------------------------------------------------------------


ELECTIVE -3 ------ ^ DIGITAL SYSTEMS AND CONTROL

(EC-172603)

Contents:

Overview of queueing theory, computational algorithms, sequential and parallel simulation techniques. Performance evaluation in distributed resource allocation, computer interconnection architecture, multiprocessing and multithreads computation, parallel 1/O architectures, distributed database concurrency control protocols, multiple access protocols in communication network, and parallel programming models, etc. Students are expected to have knowledge in probability, stochastic processes and computer architecture.

.

References:

1-"Direct control Systems: Appliction Commissioning", May S. Nardan, Kluwer, Academic Pub. , 1999.

2-"Control and Dynamic Systems: Digital Control Systems Implementation and Computational Techniques", Cornelius T. Leondes, Academic Pub., 1996.

3-" Analog and Digital Circuits for Control System Applications: using the Ti MSP 430 Microcontroller",Gerald Luecke, Newns, 2004.


--------------------------------------------------------------


ELECTIVE -4 ------ ^ NURAL NETWORKS AND ITS APPLICATIONS (EC-172604)

Contents:

General neural network principles for control applications and supervised control, direct inverse control, neural adaptive control, backpropagation-trout time (BTT), adaptive critics, sensorimotor principles. Topics include applications to adaptive control and system identification, neural networks for motion control and path planning in robotics, neural network process control, aerospace control problems and neural network autopilot, neural network control of aircraft flare and touchdown, and neural network control of autonomous vehicles.

Biological nervous system : the bran and neurons . Artificial neural networks. Historical backgrounds. Hebbian associator . Perceptions : learning rule, illustration ,proof, failing Adaptive linear ( ADALINE) and Multiple Adaptive linear (MADALINE) networks . Multilayer perceptions: generating internal representation Back propagation, cascade correlation and counter propagation networks. Higher order and bidirectional associated memory .Hopfield networks:
Lyapunov energy function. attraction basin. Probabilistic updates: simulated annealing, Boltzman machine. Adaptive Resonance Theory (ART) network ART1, ART2, Fuzzy ART mapping ( ARTMAP) networks. Kohonen's feature map, learning vector Quantization ( LVQ) networks. Applications of neural nets.

References:

1-"Neural Network: Acomprehensive Foundation", Simon Haykin, 2nd Edition, Person Eduction Pub., 1998.

2-"Fundamentals of Artificial Neural networks", Mohamed H. Hassoun, MIT Press, 1995.


--------------------------------------------------------------


ELECTIVE -5 ------ ^ SELECTED TOPICS (EC-172605)

Contents:

Advanced topics of current interest in electronics engineering. Topics are chosen so they do not duplicate any of the other courses in the department. Active participation of students encouraged in the form of writing and presenting papers in the research areas.


--------------------------------------------------------------

^ MASTER THESIS

for

(M.Sc.)



Research project chosen and completed under guidance of graduate faculty member that results in technical report and an oral defense acceptable to three-faculty-member thesis committee.

SYLLABUS :

for

Second Stage


(Electronics Engineering)

M.ENG

ُ (FULL – TIME / PART - TIME)

^ OPTOELECTRONIC DEVICES (BC-172616)

Contents:

fundamental of optical signals and modern optical devices and systems from a practical point of view. lasers and light-emitting diodes, light modulation components (e.g., liquid-crystal light modulators), transmission media (e.g., free space or fibers), photodetectors (e.g., photodiodes, photomultiplier tubes), information storage devices (e.g., optical disk), processing systems (e.g., imaging and spatial filtering systems) and displays (LCOS microdisplays). Device applications of physical phenomena, including electrical conductivity and doping, transistors, photodetectors and photovoltaics, luminescence, light emitting diodes, lasers, optical phenomena, photonics, ferromagnetism, and magnetoresistance

References:

1- "Optical Semiconductor Devices", Mitsuo Fukuda, Wiley-Interscience, 1998.

2- "optical Fiber Devices", J. P. Goure, and et al, inst of physics, 2002


--------------------------------------------------------------


^ DIGITAL FUZZY SYSTEMS (BC-172617)

Contents:

 Basic Ideas of Fuzzy Logic , Fuzzy Rules , A Tutorial Example of a Fuzzy Program, Lexical Elements

Language Structure, Transducers, Signal Conditioning, The Inverted Pendulum Problem

The Hitachi Ping-Pong Ball Controller, A Comparison of Fuzzy Logic vs PID Control

Determination of Air Polution Categories, Digital Signal Processing , Imaging Software Toolkits

Edge Detection , Soft Attributes in Data Modeling, Soft Query Representation

Defining Data Mining, Discovering Relationships Among Variables, The Sugeno-Takagi-Kang Model

Extensions of the NICEL Language , Machine Training of Fuzzy Rules


References:

1-"Fuzzy Logic ", Daniel Mcniel, Paul freiberger, Simon & Schuster Adult Publishing Group,2008

2-"Elementary fuzzy matrix theory and fuzzy models for social scientists", Florentin Smarandache, K. Ilanthenral, 2007.


-------------------------------------------------------


ELECTIVE -1 ------ ^ ADAPTIVE DIGITAL CONTROL SYSTEMS (EC-172606)

Contents:

Z Transform and modified Z transform: root-locus and frequency method of analysis of sampled data systems. Compensation, discrete and continuous method. Physical realization of discrete compensations. State space description of dynamic systems: relationship between state equations and transfer function: continuous and discrete time linear system analysis and design using state transition method. Controllability and observability. State feedback and output feedback. Pole assignment using state feedback and output feedback. Optimal control-dynamic programming. Pontryagin's minimum principle. Separation theorem. Stochastic control. Adaptive control.

References:

1-" Adaptive Control Systems", Gang Feng and Rogelio Lozano 1,999.

2-"Adaptive Control of Systems with Actuator and Sensor Nonlinearities", Gang Tao and Petar V. Kokotovic, 1996.

3-"Adaptive Control Systems (Electrical and Computer Engineering)", Chalam, 1987.


--------------------------------------------------------------

ELECTIVE -2 -----^ SIGNAL PROCESSING (EC-172607)

Contents:

Theory and practice of advanced digital signal processing techniques. Topics include computationally efficient high-speed algorithms for convolution, correlation, orthogonal transforms, multirate processing of digital signals, filter banks, multiresolution time-frequency and time-scale analysis of one- and two-dimensional signals, and parallel signal processing.


. References:

1-"Multi dimensional digital signal processing", D. E. Dudgeon and R. M. Mersereau, Prentice Hall, 1985.

2-"Multirate Digital Signal Processing", R. E. Crochiere and L. R. Rabiner, Prentice Hall, 1983.

3-"Digital Sgnal Processing: Principles, Algorithms, and Applications", John G. Proakis, Dimitris G. Manolakis, Person Prentice Hall, 2008.



--------------------------------------------------------------

ELECTIVE -3 ------^ MEDICAL ELECTRONICS (EC-172608)

Contents:

Biomedical signal analysis: physiological origins and data acquisition; temporal, frequency, and wavelet analysis; complexity, scaling, and fractals. Biomedical image analysis: imaging modalities and acquisition; object segmentation; data fusion; kinematics analysis; statistical interpretation; augmented and virtual reality.

Dynamic medical signals: electrocardiogram, electroencephalogram, electromyogram. Detailed analyses of electromedical signals: waveform, origin, interpretation and significance. Linear and nonlinear parametric modeling: autoregressive (AR), moving average (MA), autoregressive moving average (ARMA), bilinear models. Nonlinear nonparametric modeling: neural network, fractal and chaos based models. Software based medical signal detection and pattern recognition. Medical image analysis and compression. On-line monitoring and diagnosis.

References:

1-"design of Medical electronic devices", Reinaldo Perez, et al, Academic Pr., 2002.

2-"Design and development of medical electronic Instrument: Application perspective of the design construction and test of medicaldevices", David Prutchi, and et al, Wiley Interscience, 2004.


--------------------------------------------------------------

ELECTIVE -4 ------^ POWER ELECTRONICS (EC-172609)

Contents:

General neural network principles for control applications and supervised control, direct inverse control, neural adaptive control, backpropagation-trout time (BTT), adaptive critics, sensorimotor principles. Topics include applications to adaptive control and system identification, neural networks for motion control and path planning in robotics, neural network process control, aerospace control problems and neural network autopilot, neural network control of aircraft flare and touchdown, and neural network control of autonomous vehicles.

References:

1-"Power electronics for Technology", Ashfaq Ahmed Ahmed, Prentice Hall, 1999.

2-"Modern Power electronics and AC Drives", Bimal Bose, Prentice Hall, 2002.

3-"Power electronics: Circuits, Deviced and Applictions", Muhammed Rashid, Prentice Hall, 2004.



--------------------------------------------------------------


ELECTIVE -5 ------^ SELECTED TOPICS (EC-172610)

Contents:

Advanced topics of current interest in electronics engineering. Topics are chosen so they do not duplicate any of the other courses in the department. Active participation of students encouraged in the form of writing and presenting papers in the research areas.


--------------------------------------------------------------

SYLLABUS :

for

Ph.D.

(ELECTRONICS Engineering)

ُ (FULL – TIME / PART - TIME)

^ ADVANCED ELECTRONIC ENGINEERING (BC-172701)

Contents:

Residual impurities in silicon wafers, zone refining. Crystal imperfections: structural, optical and electronic properties . Implantation related defects, recovery of crystal structure, solid phase epitaxial regrowth (SPE). 

Semiconductor alloys: Structural and electronic properties: growth techniques- molecular beam epitaxy (MBE). Chemical vapour deposition (CVD): pseudomorphic and metastable structures, tetragonal distortion. Strain relaxation. Structural and optical properties of double sided heterostructures, quantum wells and superlattices; types of band alignment. 

Solid state heterostructural LED and LASER . optoelectronic Functionality in silicon chip . Structural and electrical study of heterojunction bipolar transistor (HBT), heterojunction avalanche photodiode , and silicon-germanium MOSFET. Control Systems Describe and discuss relay logic (Symbols and Components), Discuss four sample circuits to troubleshoot, electronic control methods (Analog and Digital), Build and discuss three sample circuits, Printed Circuit Board Repair, solder composition and its relation, Basic Computer Control System



References

"Advanced in electronics", Hesperides, academic Pr. , 2007.

"Advances in electron transfer chemistry, Patrick S. Mariano, Jan Pr., 1999.

"Advances in electronic and electrochemical", Prashant, N. Kumta, Amer ceramic Society, 2005.

----------------------------------------------------




^ ELECTRONIC SYSTEMS ON CHIPS AND ITS PROGRAMMING

(BC-172702)

Contents:

VLSI si process technology. Si crystal growth and wafer preparation . epitaxial growth on Si substrate. Oxidation of Si. Lithography, diffusion: methods and models. Ion implantation, metallization. Overview and process flow of a CMOS and a BICMOS process. VLSI si devices. Isolation techniques. Second order effects in BJT devices: base width modulation. Emitter current crowding, kirk effect . Second order effects in MOS devices: short channel effects, narrow width effects. Device scaling rules.
Device models. Compact models for bipolar devices. Ebers-Moll type model. Gummel-poon type model and their implementation in SPICE. BJT model in SPICE2. Compact models for MOS transistor and their implementation in SPICE. Level 1,2 and 3 MOS model parameters in SPICE. Parameter extraction for bipolar and MOS device models. Geometry, process and temperature dependency of bipolar and MOS model parameters. Parameter optimization, statistics of parameters and statistical modeling.

Trends and issues in high performance digital VLSI design : interconnect as key limiting factor, wire modeling, clock distribution of high speed system, power distribution, crosstalk and power distribution noise. High speed circuit design techniques; Low power design issues; High density and high speed memory design; SOI technology and circuits. VLSI circuits in signal processing; VLSI circuits in wireless communication. ASIC design.

References:

1-"Introduction to Advanced System chip Test, Design and Optimization: Problems, Modeling, Design and Optimization", Erik Larsson, Kluwer Academic Pub., 2005.

2-"Electronic Circuits and Systems", Owen Bishop, newnes, 2007.

--------------------------------------------------------------------------------------------------------




^ RESEARCH TOPICS AND TECHNICAL REPORTS

(BC-172703)

Contents:

 Selected topics from recent developments and applications in various engineering disciplines. Designed to help professional engineering community keep abreast of current developments.

----------------------------------------------------




ELECTIVE -1 -------^ IMAGE PROCESSING (BC-172701)

Contents:

Image Processing: enhancement technique, image compression, segmentation, morphology, color image processing and restoration. Computer Vision: representation, decision models, structural methods and image understanding. Two-dimensional signals and systems; image perception; image sampling and transforms; image enhancement and restoration; linear and nonlinear image filtering; image representation and recognition; image compression; computer vision.


N

References

"Digital Image processing using Matlab", Gonzalez, and et al, Gatesmark Publishing, 2009.

"Adaptive Blind Signal and image processing: learning algorithm and applications", Cichocki and Amari, John wiley &sons Pr., 2002.

----------------------------------------------------



ELECTIVE -2 -------^ OPTICAL PROCESSES IN SEMICONDUCTORS (EC-172702)

Contents:

Energy States in Semiconductors, Absorption and Absorption Spectrum, Radiative Transitions, Non-Radiative Recombination, Homo and Hetero-Junction, Stimulated Emission, Optical Amplifiers, Semiconductor Lasers, Luminescence, Photoelectric Emission, Optical Refractive Index, Dispersion, Linewidth enhancement factor, Polarization Effects.

References


1-Jasprit Singh, “ Semiconductor Optoelectronics : Physics and Technology”, McGraw-Hill International, 1995.

2-Jasprit Singh, “ Physics Of Semiconductors and Their Heterostructures”,McGraw-Hill International, 1993

3-Paul Harrison, “Quantum Wells, Wires and Dots”, Wiley, 2nd ed., 2005

4-Jens Buus, “Single Frequency Semiconductor Lasers”, SPIE Optical Engineering Press”, 1991

----------------------------------------------------



ELECTIVE -3 -------^ LOW POWER ELECTRONIC CIRCUITS

(BC-172701)

Contents:

Introduction, Power consumption in CMOS circuits, Low voltage devices and dual-voltage systems, Dual-threshold low leakage power devices, Reducing dynamic power: transistor sizing, glitches, ASICs, Power analysis: high level, logic simulation, probabilistic methods, Logic families: pass-transistor, pseudo-nMOS, dynamicCMOS, dominoCMOS, Adiabatic and energy recovery logic, Memories: power consumption and low-power design, Power-aware processors: benchmarking and low-power architectures, Multi-core parallelism and low-power systems, Power reduction in FPGA, Clock distribution network and its power consumption, Test power reduction methods, Class test, review and graduate student presentations.




References

1-" Digital Integrated Circuits: A Design Perspective", J. M. Rabaey, A. Chandrakasan and B. Nikolić, Upper Saddle River, NJ: Person Education, 2003.

2-"Low Power CMOS-VLSI Circuit Design", Kaushik Roy, and Sharat C. Prasad, Wiley InterScience, 2000.

3- "Low Power Electronics Design", Christian Piguet, 1992.




----------------------------------------------------



ELECTIVE -5 -------^ SELECTED TOPICS (EC-172704)

Contents:

Advanced topics of current interest in communication engineering. Topics are chosen so they do not duplicate any of the other courses in the department. Active participation of students encouraged in the form of writing and presenting papers in the research areas.


--------------------------------------------------------------


Study Plan for --- Diploma:

(Electronic Engineering)



Electronic Devices (BC- 172505)

Contents

Review of MOSFET characteristics, device modeling for circuit simulation (SPICE models), the BSIM MOSFET models, other semiconductor models, circuit model parameter characterization, design guard-band and statistical modeling.

The two terminal MOS Structure: flat-band voltage, inversion, properties of the regions of inversion and small signal capacitance. The four terminal MOS structure: charge-sheet model, strong inversion, moderate inversion and weak inversion. Threshold voltage-effects of ion implantation, short channel and narrow width. The MOS transistor in dynamic operation, small signal model for low medium and high frequencies, Charge Coupled devices (CCD). Introduction to GaAs device technology. GaAs metal-semiconductor field effect transistor (GaAs MESFET): introduction, structure, equivalent circuits, current saturation, effect of source and drain resistances, gate resistance and application of GaAs MESFET. High electron mobility transistor (HEMT):practical HEMT structure, energy band line-up, equivalent circuit, HEMT noise, pseudomorphic HEMT and applications. Opto-electronic integration of compound semiconductor devices: heterojunction phototransistor (HPT) and light amplifying optical switch (LAOS). Low-temperature compound semiconductor electronics. Design consideration of MMICs and power MMICs using compound semiconductor devices.

References:

1-"Fundamentals of Electrical and Electronic Engineering", Smarajit Ghosh, PHI Learning Pvt. Ltd., 2004.

2-" Electrical Circuit Theory and Technology", J. O. Bird, Newness, 2007.

3-" Outline of Theory and Problems of Electronic Devices and Circuits", Jimmie J. Cathey Schaum's, McGraw Hill, 2002.

4-" Analog Circuits and Devices", Wai-Kai Chen CRC Press, 2003.

النبائط الالكترونية BC172505





  • يتم فى هذا المنهج استعراض خصائص الترانزستور ذو التأثير المجالى.

  • نمذجة النبائط لتحقيق محاكاة الدوائر الالكترونية بعدة طرق:- منها على سبيل المثال ^ SPICE , BSIM و كذلك نمذجة أشباه الموصلات الأخرى و العناصر التى بها يتم تخصيص نماذج الدوائر الإلكترونية.

  • دراسة بناء ال MOS ذو الطرفين و الأربعة أطراف من ناحية جهد النطاق ذو التردد العريض و تحويلاته و كذلك خصائص مناطق التحويل بوجود مكثفات تتواجد عند الترددات المنخفضة بالدائرة المطلوبة.

  • أيضا يتم الدراسة فى الترددات المتوسطة و المنخفضة مع تأثير الجهد الفاصل على تمثيل الأيونات بالدائرة و القنوات الصغيرة ذات عرض النطاق المنخفض.

  • دراسة عمل الترانزستور من النوع MOS فى العمليات الديناميكية و كذلك النبائط ذات الشحن الارتباطي و مقدمة عن مادة GaAs.

  • دراسة الترانزستور ذو التأثير المجالى من نوع GaAs من ناحية بناء هذا العنصر و الدائرة الكهربية المكافئة له و تيار التشبع و مدى تأثير مقاومات المصدر و المصب له (Source & Drain) و كذلك مقاومة البوابة على البوابات التى يمكن فيها استخدام هذا النوع من الترانزستورات.

  • دراسة الترانزستور من نوع HEMT من ناحية البناء الخاص به و كذلك الدائرة المكافئة له و نطاق الطاقه به و كذلك الضوضاء الصادرة منه و التطبيقات التى يمكن استخدامه فيها.

  • دراسة أشباه الموصلات ذات الإلكترونيات الضوئية المتكاملة مثل نوع HPT و كذلك النبائط التى تعمل كمفتاح باستخدام الاشعة و المسمى ب LAOS و كذلك نبائط أشباه الموصلات التى تعمل تحت التأثير الحرارى و كذلك الاهتمام بتصميم أنواع HMICS.

--------------------------------------------------------------


^ Integrated Circuits (BC-172506)

Contents

Current sources, output stages, operational amplifiers, frequency response, feedback analysis, stability and compensation, slew rate, advanced integrated-circuit design techniques, analog VLSI building blocks.

Noise analysis, advanced op-amp design techniques, analog VLSI building blocks, multipliers, oscillators, mixers, phase-locked loops, A/D and D/A converters, passive filter design, frequency scaling, active filter design.

Review of MOSFET characteristics, device modeling for circuit simulation (SPICE models), the BSIM MOSFET models, other semiconductor models, circuit model parameter characterization, design guard-band and statistical modeling.

System definition, design and analysis of integrated circuit systems: mixed-signal systems, low power systems, embedded systems, etc. System trade-offs; introduction to system-on-chip (SOC) concepts and methodology.




References:

1-" Electronic Design Automation For Integrated Circuits", Luciano Lavagno, et al , CRC Pr I Llc; 2006.

2-" Digital Integrated Circuit Design: From VLSI Architectures to CMOS Fabrication", Hubert Kaeslin , Cambridge Univ Pr; 2008.




الدوائر المتكاملة BC172506





  • فى هذا المنهج يتم التعرف على مصادر التيار و مراحل الخرج.

  • مكبر العمليات و طرق التصميم الحديثة له.

  • تحليل الأداء مع التردد و تحليل تأثير التغذية الخلفية.

  • دراسة استقرار الدوائر و أساليب التعويض لها.

  • معدل التدرج فى تقدم الدوائر الإلكترونية و التكنولوجيا الحديثة المستخدمة فى صناعتها و كيفية بناء الدوائر التماثلية مع تحليل نسبة الضوضاء بها.

  • دراسة المذبذبات و دوائر الضرب الحسابي و دوائر الخلط و الأنظمة مغلقة الوجه.

  • أنظمة التحويل من رقمى إلى تماثلى و العكس.

  • تصميم المرشحات الغير فعالة و الفعالة.

  • تعريف النظام المطلوب و تصميم الدوائر المتكاملة المطلوبه له و كذلك دمج الإشارات ذات الطاقة المنخفضة و كذلك الأنظمة المتضمنة لكل احتياجاتها.

  • طرق و خطوات تحقيق بناء أى نظام على نبيطة الكترونية واحدة.


--------------------------------------------------------------


^ Computer Aided Electronic circuit Design (BC- 172507)

Contents

Design of electronic circuits using computer-based work station. Includes schematic capture, simulation, and PC board layout. Design combinational logic by using schematic capture tools and verify the circuit by simulation. Design sequential logic by using schematic capture tools and verify the circuit by simulation. Design complex digital circuits based on hierarchy approaches. Model and verify combinational logic by using VHDL language. Model and verify sequential logic by using VHDL language. Demonstrate competence in written technical communication.

References

1-"Analog circuit design: operational amplifier, Analog to digital converter, Analog computer Aided Design", Johan H. Huijsing, et al, Kluwer Academic Pub; 1999.

2-"Computer Aided Logical Design With Emphasis on VlSI", Fredrick J. Hill, et al , John Wiley & Sons Inc; 1993.




- تصميم الدوائر الإلكترونية باستخدام الحاسب BC172507





  • تصميم الدوائر الإلكترونية باستخدام حزم البرمجيات التى يتم تحميلها على الحاسب الآلى الشخصى أو على الحاسبات الكبيرة.

  • و يشتمل هذا التصميم على كيفية بناء الدائرة الإلكترونية المطلوبة و عمل محاكاة لأدائها حتى يمكن التأكد من مطابقة أداء الدائرة لما هو مطلوب منها.

  • يتم بعد ذلك عمل الدائرة المطبوعه المناظرة للبناء النهائي للدائرة الإلكترونية و يشمل التصميم على الدوائر الإلكترونية المتراكبة و المتعاقبة و يتم حديثا عمل نمذجة و محاكاة لمثل هذه الدوائر حتى تنفيذ المراحل النهائية بالاستعانة بلغة VHDL و التى يجب دراستها و كيفية التعامل بها مع الشرائح الإلكترونية المتقدمة الحديثة.

-------------------------------------------------------------

^ RESEARCH TOPICS AND TECHNICAL REPORTS

(BC-172608)

Contents:

 Selected topics from recent developments and applications in various engineering disciplines. Designed to help professional engineering community keep abreast of current developments.

التقارير الفنية و نقاط البحث BC172608





  • يتم فيها اختيار النقاط المطلوب كتابة التقرير عنها بما يتناسب مع التقدم الحديث و كذلك التطبيقات ذات الطابع المتطور فى مجال التخصص الهندسي بما يساعد على تكوين نوعية من المهندسين العصريين.


--------------------------------------------------------------


^ PROJECT (BC-172529)

Senior Advanced Design Project : Conception of the senior design project and determination of the feasibility of the proposed project. Work includes developing a preliminary design and an implementation plan.

المشـــروع BC17259





  • و يشمل تكوين فكرة المشروع و كيفية تنفيذه بأساليب حديثة تتناسب مع التخصص المطلوب تدريسه و الذى ترتبط به فكرة المشروع.

-------------------------------------------------------------------------

Elective Courses

مواد اختيــــاريــــة

Microprocessors and Interfacing circuits (EC-172501)

Contents

Microprocessor-based system, including bus structure, interrupts handling, I/O ports, control signal, and peripherals. Combinational and sequential logic circuitry implemented with Field Programmable Gate Array design methodology. A comprehensive understanding of the instruction set and the related programming algorithmic thought process required to design with and incorporate microprocessor-based systems in dedicated applications. Serial and parallel data communication, exception processing, file transfer protocol, I/O interfacing and peripherals, and assembly language programming Transform methods in circuit analysis, including the detailed analysis of circuits, waveforms, time-domain techniques, Laplace transform solutions, transfer functions, frequency response and Bode diagrams.




References

1-"Practical Electronics", Sixth editions, IAN R. SINCLAIR AND JOHN DUNTON, Newnes, 2007.

2-" Simulation in the Design of Digital Electronic Systems", J. B. Gosling, Cambridge Univ Pr, 1993.

المشغلات الدقيقة و دوائر المواجهة لها EC172501





  • تشمل دراسة المشغل الأساسي و كذلك بناء التوصيلات المرتبطة به و أنظمة المقاطعة و منافذ الإدخال و الإخراج للبيانات المطلوبة.

  • دراسة وحدات التحكم و الوحدات الطرفية المرتبطة به و كذلك دراسة تنفيذ الدوائر المتراكبة و المتعاقبة باستخدام النبائط الحديثة مثل حقول البوابات المنطقية المتراصه القابلة للبرمجة FPGA.

  • دراسة الأوامر المرتبطة و الوثيقة الارتباط لتمثيل الخوارزميات للأنظمة ذات التطبيقات العملية باستخدام المشغلات الدقيقة.

  • و كذلك وسائل نقل بيانات الاتصال سواء المتوالية منها أو المتوازية.

  • دراسة كيفية نقل الملفات المطلوبة من خلال لغة التجميع و ما يلزم ذلك من باقي وحدات المشغل الدقيق و كذلك الوحدات الطرفية و ما يلزمها من أشكال الإشارات من خلال مراقبة الأداء بالنسبة للزمن.


--------------------------------------------------------------


^ Electronic Materials Engineering (EC-172502)

Contents:

Electric Properties: Polarization, electrical conductivity and dielectric losses. Pyroelectric phenomena . piezoelectric effect and electrostriction. Domain structure and peculiarities electric properties of ferroelectrics and anti-ferroelectrics. Structure and properties of some ferroelectrics and anti-ferroelectrics. Phase transition in ferroelectrics, fundamentals of spontaneous polarization theory. Magnetic Properties: Disordered magnetics, ordered magnetics. Domain structure of ferromagnetic crystals and magnetization processes. Anisotropy of ferroelectric crystals. Structure of some magnetically ordered crystals and reorientation transition. Piezomagnetic and magnetoelectric effect. Crystal Structure: lattice types, basis, defects, reciprocal lattice, Miller indices. Free Electron Theory: Drude model and Sommerfield theory. Band Theory: Blochis theorem and crystal momentum, the nearly free electron model, band structures of Si and lll-V semiconductors. Carrier Transport: Boltzmann transpord theory, relaxation time approximation, high field transport and hot-carrier effects, Hall effect.  Fabricating MOS transistors. Process modules including photolithography, dry etching, wet etching, metal sputtering, oxidation, diffusion and low-pressure chemical-vapor deposition will be covered. Student will also learn to characterize the fabricated devices.

Refereneces:

1-" Electronic Materials and Devices", David K. Ferry/Jonathan P. Bird, Academic Press, 2001.

2-"The VLSI Handbook", Second Edition, Richard C. Dorf, Wai-Kai Chen, CRC Press, 2007.



--------------------------------------------------------------


^ Printed Circuits Design and Technologies (EC-1725-03)

Contents

Structured design styles, specification, synthesis and simulation using hardware descriptive language (HDL), structural chip design and system design, circuit design of system building blocks: arithmetic unit, memory systems, clocking and performance issues in system design, design-automation tools and their applications, introduction to testing. The course focuses on the use of hardware description languages such as VHDL/Verilog in the design of digital systems for platform-independent design. Target implementation platform include both ASIC (standard cell design) and FPGAs. High-level design tools will be introduced for specification, simulation, and synthesis. The course will introduce design methodologies such as top-down synthesis approach, Hierarchical and abstraction concepts, HDL for synthesis, design for testability. Specialized application and specific VLSI/FPGA architectures will be discussed.




References:

1-" High Performance Printed Circuit Boards", Charles A. Harper, McGraw-Hill Professional, 2000.

2-" Analysis and Design of Digital Systems With Vhdl", Allen Dewey, Pws Pub Co, 1996.

تكنولوجيا و تصميم الدوائر الإلكترونية المطبوعة EC172503





  • دراسة تصميم نماذج بناء الدوائر الإلكترونية و خصائصها و تحليلاتها و محاكاتها باستخدام لغة HDL و كذلك تصميم بنية النبائط و الأنظمة الإلكترونية

  • تصميم الدوائر المكونة للأنظمة الرقمية مثل وحدة الحساب و نظم الذاكرة و دوائر الإشارات المرتبطة بضبط التزامن فى هذه الأنظمة CLK.

  • طرق تصميم و تحقيق أ تمتة الأنظمة الرقمية و التطبيقات التى يمكن استخدام هذه الأنظمة فيها و كذلك طرق اختبار و تشخيص الأعطال بهذه الأنظمة.

  • دراسة لغة VHDL و كيفية استخدامها فى برمجة الأنظمة ذات التطبيق الخاص و المسمى ب ASIC و كذلك برمجة الأنظمة الأخرى بداخل نبائط FPGA مع مراعاة معرفة تحليلات و محاكاة الأنظمة المطلوب برمجتها.

  • مع مراعاة معرفة البناء الأساسي للنبائط ذات النطاق الكبير للدوائر المتكاملة VLSI و كذلك لنبائط FPGA و المعروفة بـحقل البوابات المنطقية المتراصة القابلة للبرمجة.


--------------------------------------------------------------


^ Electronic Measurements (EC-1725-04)

Contents

Introduction to techniques for analyzing, engineering and testing of circuits for RF/microwave frequencies using CAD tools. CAD/simulation, building and testing of low-noise amplifier, mixer, VCO, filter, IF AGC. Theoretical principles relevant to all measurements for electrical, thermal and mechanical systems. System science approach of instrument description. The fundamental aspects of measurement, including theory of measurement, systems of units, standards, measurement methods, data acquisition, sampling, multiplexing and aliasing. Practical aspects of measurement, including transducers, interference, noise, AD and DA conversion and instrument data busses.

References

1-"Analog Electronic with Labview", Kenneth L. Ashley, Prentice Hall, 2002.

2-"LabVIEW based Advanced Instrumentation Systems", S. Sumathi and P. Surekha, Springer Science Pub., 2007.

3-" Electronic measurement and instrumentation", Klaas B. Klaassen, Cambridge University Press, 1996.

قياسات إلكترونية





  • دراسة مقدمة عن الطرق الهندسية لتحليل و اختبار دوائر الترددات العالية باستخدام حزم برمجيات الحاسب الآلي و التى بإمكانها عمل بناء و اختبار و محاكاة الدوائر المطلوبة مثل المكبرات ذات الضوضاء المنخفضة و دوائر الخلط و المذبذبات و المرشحات و غيرها.

  • يراعى فى دراسة وسائل القياس النظريات الأساسية و كذلك البنية الأساسية لطرق القياس سواء كانت لقياس أنظمة كهربية أو ميكانيكية.

  • و يشمل ذلك مراعاة القياسات القياسية و أساليب تجميع البيانات المطلوبة و طرق أخذ عينات منها و أساليب اختبارها و أساليب التداخلات العملية أثناء القياس.

  • أيضا يشمل أساليب التحويل و التداخلات و الضوضاء و كذلك دوائر التحويل من رقمى إلى تماثلى أو العكس مع معرفة وسائل نقل البيانات المطلوبة.


--------------------------------------------------------------


ELECTIVE-5 ^ SELECTED TOPICS

(EC-172515)

Contents:

Advanced topics of current interest in electronic engineering. Topics are chosen so they do not duplicate any of the other courses in the department. Active participation of students encouraged in the form of writing and presenting papers in the research areas.

عناوين مختارة EC972515


  • يراعى فى هذا المنهج أن يتم فيه دراسة بعض الموضوعات المختارة عن أحدث الموضوعات فى مجال هندسة الاتصالات و الإلكترونيات مع مراعاة عدم تكرار هذه الموضوعات فى مناهج أخرى.

  • و يتم تشجيع الطلاب على عمل مقالات و إلقاءها فى مجال نقاط البحث و فى نطاق التخصص.



--------------------------------------------------------------


Study Plan for --- Diploma:

(Electronic Measurement and Instrumentation

Engineering)



Electronic measurement systems (BC-172510)

Contents:

Instrumentation Technology- Calibration measurement- intelligent Instrumentation- Basic variables instrumentation- Analog and digital storage data instrumentation- measurement recording- Design of automatic instrumentation.

References:

  1. Electronic Measurement and Instrumentation, Klass B. Klaassen , Cambridge University Press, 1996.

  2. Electonic test Instruments: Analog and digital measurements, Robert Witte, Cambridge University Press, 1996.



Measuring Instrument and electronic testing (BC-172511)

Contents

Introduction to electronic measurement instruments- Basic of electronic instruments- current and voltage measurements instruments- current and voltage measurements instruments- signal and waveform generation instruments- frequency and time measurements instruments- phase noise instruments- spectrum analyzer- logic analyzer.

References:

1-"Analog Electronic with Labview", Kenneth L. Ashley, Prentice Hall, 2002.

2-"LabVIEW based Advanced Instrumentation Systems", S. Sumathi and P. Surekha, Springer Science Pub., 2007.

3-" Electronic measurement and instrumentation", Klaas B. Klaassen, Cambridge University Press, 1996.

Microprocessors and its Applications (BC-17512)

Contents

Embedded System designers and Computer Engineers- Broad and in-depth overview of important topics ranging from Computer Architecture and Operating System design to PCB Layout and manufacturing guidelines- Hardware and software design methodologies, use of CAD and simulation tools, assemblers, compilers, debuggers, and programmers. Microprocessor architectures from Motorola, Intel, and ARM will be discussed and evaluated, as well as Operating Systems such as uC-Linux and PalmOS. Computer interfaces such as USB, PCI, Ethernet, and Bluetooth will also be discussed in detail.

References:

  1. Microprocessor Architecture, Programming and Applications with 8085, Ranesh S. Gaonkar, prentice Hall, 1998.

2-"Practical Electronics", Sixth editions, IAN R. SINCLAIR AND JOHN DUNTON, Newnes, 2007.


Studying Topics, and Technical Reports (BC-17513)

Contents:

 Selected topics from recent developments and applications in various engineering disciplines. Designed to help professional engineering community keep abreast of current developments.



^ PROJECT (BC-172514)

Senior Advanced Design Project : Conception of the senior design project and determination of the feasibility of the proposed project. Work includes developing a preliminary design and an implementation plan.

-------------------------------------------------------------------------------------

Elective Courses(EC),


^ Electronic Circuits Design (EC-172506)

Contents

Node voltage and mesh current methods for solving circuits- Ebers-Moll bipolar junction transistor- the vertical geometries of integrated circuit devices commonly used in linear circuits- Unwanted parasitic devices that are introduced as a result of the integrated circuit processes are revealed and their effects on circuit sign techniques operation - The limitations and the opportunities provided by integrated circuit technology- Applications of linear circuits- Analog-to-digital and digital-to-analog conversion- The inverse relationship between speed and accuracy- switched capacitor filters, phase lock loops, analog multipliers, and voltage-controlled oscillators.

References

1-"Analog circuit design: operational amplifier, Analog to digital converter, Analog computer Aided Design", Johan H. Huijsing, et al, Kluwer Academic Pub; 1999.

2- ^ Simulation in the Design of Digital Electronic Systems", J. B. Gosling, Cambridge Univ Pr, 1993.

Signal processing (EC-172507)

Contents

introduction to the fundamentals of one-dimensional discrete-time (digital) signal processing. Analysis and design of finite impulse response (FIR) and infinite impulse response (IIR) digital filters, the discrete Fourier transform (DFT) and its computation via the fast Fourier transform (FFT), error analysis due to the constraints of finite arithmetic.

The emphasis on the analysis and design of linear time-invariant discrete-time filters rests on the background acquired in the time as well as transform domain analysis of continuous-time and discrete-time signals and systems interfaced via the Shannon sampling theory- Signal and Image Processing- Linear system analysis in one-dimension and two-dimensions, emphasis on filtering; multi-dimensional signal analysis; image enhancement and reconstruction; computer simulation applications. Multidimensional Signal Processing - Multidimensional sampling, weak causality, recursibility, multidimensional transforms, stability, global and local state-space models, multidimensional filters, and multidimensional spectrum estimation.

References:

  1. Analog MOS Integrated circuits for signal processing, Roubik Grogorian, prentice Hall, 2006.

  2. Digital signal processing principles, Algorithms, and Applications, John G. proakis, Dimitris G. Manolakis, Prentice Hall, 2006.

  3. First principles of discrete systems and digital signal processing, Robert D. Strum, Donald E. Kirk, Adisson-Wesley Publishing company, 1998.


Testing and Instrument's Calibrations (EC-172508)

Contents


Test and calibration equipment for electricity meters- Electrical test equipment (oscilloscope, transistor , semiconductor, computers and data processing equipment)- production line for electrical components- Quality and reliability test equipment for electronic components and systems- customer specification- White noise generating and test equipment- thermocouple Sensors, capacitive Sensors, electrical Static charge dissipation test equipment- non-contact Measuring systems, video Measuring equipment, electrical, multi-purpose Production and industrial process control equipment, electrical and electronic Water quality monitoring instruments.

References:


  1. Electrical Measurment and Instrumentation, Klaas B. Klaassen, Cambridge University press, 1996.

  2. Design-For-Test for Digital Ic's & Embedded Core Systems, Alfred L. Crouch, Prentice Hall, 1999.


Integrated circuit (EC-172509)

Contents

Semiconductor Integrated Circuit Technology - An overview of fundamentals of processes involved in silicon integrated circuit fabrication- Linear Integrated Circuits - Design of monolithic, thin-film, and hybrid linear integrated circuits; D.C., video, tuned, and microwave applications- BJT-based saturating and non-saturating digital circuits of ever increasing complexity - Evolution of the modern bipolar logic circuit families. The metal oxide semiconductor field effect transistor (MOSFET) and proceeds along the same path taken for the bipolar transistor circuits. Various MOSFET logic circuit families are introduced and analyzed. Computer semiconductor memory circuits - Both BJT and MOSFET versions of both static and dynamic read-write and read-only memories - The cell array, memory addressing circuits, and sense amplifier designs.

References:

1-" ^ Electronic Design Automation For Integrated Circuits", Luciano Lavagno, et al , CRC Pr I Llc; 2006.

2-" Digital Integrated Circuit Design: From VLSI Architectures to CMOS Fabrication", Hubert Kaeslin , Cambridge Univ Pr; 2008

^ SELECTED TOPICS

(EC-172510)

Contents:

Advanced topics of current interest in communication engineering. Topics are chosen so they do not duplicate any of the other courses in the department. Active participation of students encouraged in the form of writing and presenting papers in the research areas.

مختارة EC972510


  • يراعى فى هذا المنهج أن يتم فيه دراسة بعض الموضوعات المختارة عن أحدث الموضوعات فى مجال هندسة الاتصالات و الإلكترونيات مع مراعاة عدم تكرار هذه الموضوعات فى مناهج أخرى.

  • و يتم تشجيع الطلاب على عمل مقالات و إلقاءها فى مجال نقاط البحث و فى نطاق التخصص.



--------------------------------------------------------------






Download 0.57 Mb.
leave a comment
Page2/9
Date conversion30.09.2011
Size0.57 Mb.
TypeДокументы, Educational materials
Add document to your blog or website

страницы: 1   2   3   4   5   6   7   8   9
Be the first user to rate this..
Your rate:
Place this button on your site:
docs.exdat.com

The database is protected by copyright ©exdat 2000-2014
При копировании материала укажите ссылку
send message
Documents

upload
Documents

Рейтинг@Mail.ru
наверх